USB phys in ipq9574 use the 'L5' regulator. The commit ec4f047679d5 ("arm64: dts: qcom: ipq9574: Enable USB") incorrectly specified it as 'L2'. Because of this when the phy module turns off/on its regulators, the wrong regulator is turned off/on resulting in 2 issues, namely the correct regulator related to the USB phy is not turned off/on and the module powered by the incorrect regulator is affected. Fixes: ec4f047679d5 ("arm64: dts: qcom: ipq9574: Enable USB") Signed-off-by: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx> --- v2: * Reword the commit message * Format to 72 chars * No code change --- arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi b/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi index ae12f069f26f..b24b795873d4 100644 --- a/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi @@ -111,6 +111,13 @@ mp5496_l2: l2 { regulator-always-on; regulator-boot-on; }; + + mp5496_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; }; }; @@ -146,7 +153,7 @@ &usb_0_dwc3 { }; &usb_0_qmpphy { - vdda-pll-supply = <&mp5496_l2>; + vdda-pll-supply = <&mp5496_l5>; vdda-phy-supply = <®ulator_fixed_0p925>; status = "okay"; @@ -154,7 +161,7 @@ &usb_0_qmpphy { &usb_0_qusbphy { vdd-supply = <®ulator_fixed_0p925>; - vdda-pll-supply = <&mp5496_l2>; + vdda-pll-supply = <&mp5496_l5>; vdda-phy-dpdm-supply = <®ulator_fixed_3p3>; status = "okay"; -- 2.34.1