Hello, On Tue, 4 Feb 2025 at 19:11, Jeff Johnson <jeff.johnson@xxxxxxxxxxxxxxxx> wrote: > > On 2/1/2025 8:03 AM, Dmitry Baryshkov wrote: > > Hello, > > > > With the hopes of getting this into the February linux-firmware release: > > Please add the following BDF file to the archive > > > > * description for what hardware this is > > - Qualcomm Robotics RB3 gen2 platform > > - WCN6750 WiFi/BT chip controlled via the remoteproc (DSP) > > * origin of the board file > > - It has been provided by Qualcomm as a part of the RB3gen2 firmware > > release, licenced under LICENSE.qcom > > * ids to be used with the board file > > - WCN6750 / hw 1.0 > > bus=ahb,qmi-chip-id=1,qmi-board-id=25,variant=Qualcomm_rb3gen2 > > * md5sum of each new board file to add > > md5sum bus\=ahb\,qmi-chip-id\=1\,qmi-board-id\=25\,variant\=Qualcomm_rb3gen2.bin > > 39b270f43cb6d733cde607bf2b23e2be > > bus=ahb,qmi-chip-id=1,qmi-board-id=25,variant=Qualcomm_rb3gen2.bin > > > > Qualcomm will handle this, pushing a BDF + regdb. I'm sorry, I don't quite understand this phrase. I'll send v2 with the regdb included, letting you handle merging of those two files into ath11k-firmware and then doing a quick PR to linux-firmware (it would be nice to get it in before the February release, ensuring that they can end up in the next Debian release). -- With best wishes Dmitry
