Add thermal zones, tsens and qfprom nodes Acked-by: Eduardo Valentin <edubezval@xxxxxxxxx> Acked-by: Rob Herring <robh@xxxxxxxxxx> Signed-off-by: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx> --- arch/arm/boot/dts/qcom-apq8084.dtsi | 103 ++++++++++++++++++++++++++++++++++++ 1 file changed, 103 insertions(+) diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index 7c2df06..39eb7a4 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -94,6 +94,88 @@ }; }; + thermal-zones { + cpu-thermal0 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 5>; + + trips { + cpu_alert0: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit0: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal1 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 6>; + + trips { + cpu_alert1: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit1: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal2 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 7>; + + trips { + cpu_alert2: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit2: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal3 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 8>; + + trips { + cpu_alert3: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit3: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + cpu-pmu { compatible = "qcom,krait-pmu"; interrupts = <1 7 0xf04>; @@ -150,6 +232,27 @@ reg = <0xf9011000 0x1000>; }; + qfprom: qfprom@fc4bc000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "qcom,qfprom"; + reg = <0xfc4bc000 0x1000>; + tsens_calib: calib@d0 { + reg = <0xd0 0x18>; + }; + tsens_backup: backup@440 { + reg = <0x440 0x10>; + }; + }; + + tsens: thermal-sensor@fc4a8000 { + compatible = "qcom,msm8974-tsens"; + reg = <0xfc4a8000 0x2000>; + nvmem-cells = <&tsens_calib>, <&tsens_backup>; + nvmem-cell-names = "calib", "calib_backup"; + #thermal-sensor-cells = <1>; + }; + timer@f9020000 { #address-cells = <1>; #size-cells = <1>; -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html