On Mon, Jan 13, 2025 at 01:22:23PM -0800, Melody Olvera wrote:
> From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
>
> Add the PMIC glink node with connectors for SM8750 MTP and QRD.
Move to the USB patchset, add necessary graph links.
>
> Signed-off-by: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
> Signed-off-by: Melody Olvera <quic_molvera@xxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sm8750-mtp.dts | 34 +++++++++++++++++++++++++++++++++
> arch/arm64/boot/dts/qcom/sm8750-qrd.dts | 34 +++++++++++++++++++++++++++++++++
> 2 files changed, 68 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
> index 9e3aacad7bdab6848e86f8e45e04907e1c752a07..0bca1f9acdedfe1852293b72862979e42fdd6241 100644
> --- a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
> @@ -81,6 +81,40 @@ key-volume-up {
> };
> };
>
> + pmic-glink {
> + compatible = "qcom,sm8750-pmic-glink",
> + "qcom,sm8550-pmic-glink",
> + "qcom,pmic-glink";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + orientation-gpios = <&tlmm 61 GPIO_ACTIVE_HIGH>;
> +
> + connector@0 {
> + compatible = "usb-c-connector";
> + reg = <0>;
> +
> + power-role = "dual";
> + data-role = "dual";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + pmic_glink_hs_in: endpoint {
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + pmic_glink_ss_in: endpoint {
> + };
> + };
SBU?
> + };
> + };
> + };
> +
> vph_pwr: vph-pwr-regulator {
> compatible = "regulator-fixed";
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8750-qrd.dts b/arch/arm64/boot/dts/qcom/sm8750-qrd.dts
> index f77efab0aef9bab751a947173bcdcc27df7295a8..c53c08fc7d0d759aab921c76550bf98c2a308d49 100644
> --- a/arch/arm64/boot/dts/qcom/sm8750-qrd.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8750-qrd.dts
> @@ -80,6 +80,40 @@ key-volume-up {
> };
> };
>
> + pmic-glink {
> + compatible = "qcom,sm8750-pmic-glink",
> + "qcom,sm8550-pmic-glink",
> + "qcom,pmic-glink";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + orientation-gpios = <&tlmm 61 GPIO_ACTIVE_HIGH>;
> +
> + connector@0 {
> + compatible = "usb-c-connector";
> + reg = <0>;
> +
> + power-role = "dual";
> + data-role = "dual";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + pmic_glink_hs_in: endpoint {
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + pmic_glink_ss_in: endpoint {
> + };
> + };
SBU?
> + };
> + };
> + };
> +
> vph_pwr: vph-pwr-regulator {
> compatible = "regulator-fixed";
>
>
> --
> 2.46.1
>
--
With best wishes
Dmitry
