On 10/01/2025 16:29, Abel Vesa wrote:
> The pmic_glink_altmode_worker() currently gets scheduled on the system_wq.
> When the system is suspended (s2idle), the fact that the worker can be
> scheduled to run while devices are still suspended provesto be a problem
> when a Type-C retimer, switch or mux that is controlled over a bus like
> I2C, because the I2C controller is suspended.
>
> This has been proven to be the case on the X Elite boards where such
> retimers (ParadeTech PS8830) are used in order to handle Type-C
> orientation and altmode configuration. The following warning is thrown:
>
> [ 35.134876] i2c i2c-4: Transfer while suspended
> [ 35.143865] WARNING: CPU: 0 PID: 99 at drivers/i2c/i2c-core.h:56 __i2c_transfer+0xb4/0x57c [i2c_core]
> [ 35.352879] Workqueue: events pmic_glink_altmode_worker [pmic_glink_altmode]
> [ 35.360179] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
> [ 35.455242] Call trace:
> [ 35.457826] __i2c_transfer+0xb4/0x57c [i2c_core] (P)
> [ 35.463086] i2c_transfer+0x98/0xf0 [i2c_core]
> [ 35.467713] i2c_transfer_buffer_flags+0x54/0x88 [i2c_core]
> [ 35.473502] regmap_i2c_write+0x20/0x48 [regmap_i2c]
> [ 35.478659] _regmap_raw_write_impl+0x780/0x944
> [ 35.483401] _regmap_bus_raw_write+0x60/0x7c
> [ 35.487848] _regmap_write+0x134/0x184
> [ 35.491773] regmap_write+0x54/0x78
> [ 35.495418] ps883x_set+0x58/0xec [ps883x]
> [ 35.499688] ps883x_sw_set+0x60/0x84 [ps883x]
> [ 35.504223] typec_switch_set+0x48/0x74 [typec]
> [ 35.508952] pmic_glink_altmode_worker+0x44/0x1fc [pmic_glink_altmode]
> [ 35.515712] process_scheduled_works+0x1a0/0x2d0
> [ 35.520525] worker_thread+0x2a8/0x3c8
> [ 35.524449] kthread+0xfc/0x184
> [ 35.527749] ret_from_fork+0x10/0x20
>
> The solution here is to schedule the altmode worker on the system_freezable_wq
> instead of the system_wq. This will result in the altmode worker not being
> scheduled to run until the devices are resumed first, which will give the
> controllers like I2C a chance to resume before the transfer is requested.
Nice job figuring this out, it was definitely a confusing one :D
>
> Fixes: 080b4e24852b ("soc: qcom: pmic_glink: Introduce altmode support")
> Cc: stable@xxxxxxxxxxxxxxx # 6.3
> Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
Reviewed-by: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
> ---
> drivers/soc/qcom/pmic_glink_altmode.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/soc/qcom/pmic_glink_altmode.c b/drivers/soc/qcom/pmic_glink_altmode.c
> index bd06ce16180411059e9efb14d9aeccda27744280..bde129aa7d90a39becaa720376c0539bcaa492fb 100644
> --- a/drivers/soc/qcom/pmic_glink_altmode.c
> +++ b/drivers/soc/qcom/pmic_glink_altmode.c
> @@ -295,7 +295,7 @@ static void pmic_glink_altmode_sc8180xp_notify(struct pmic_glink_altmode *altmod
> alt_port->mode = mode;
> alt_port->hpd_state = hpd_state;
> alt_port->hpd_irq = hpd_irq;
> - schedule_work(&alt_port->work);
> + queue_work(system_freezable_wq, &alt_port->work);
> }
>
> #define SC8280XP_DPAM_MASK 0x3f
> @@ -338,7 +338,7 @@ static void pmic_glink_altmode_sc8280xp_notify(struct pmic_glink_altmode *altmod
> alt_port->mode = mode;
> alt_port->hpd_state = hpd_state;
> alt_port->hpd_irq = hpd_irq;
> - schedule_work(&alt_port->work);
> + queue_work(system_freezable_wq, &alt_port->work);
> }
>
> static void pmic_glink_altmode_callback(const void *data, size_t len, void *priv)
>
> ---
> base-commit: 2b88851f583d3c4e40bcd40cfe1965241ec229dd
> change-id: 20250110-soc-qcom-pmic-glink-fix-device-access-on-worker-while-suspended-af54c5e43ed6
>
> Best regards,
--
// Caleb (they/them)
