On the SM8650, the dynamic clock and voltage scaling (DCVS) for the GPU
is done in an hardware controlled loop by the GPU Management Unit (GMU).
Since the GMU does a better job at maintaining the GPUs temperature in an
acceptable range by taking in account more parameters like the die
characteristics or other internal sensors, it makes no sense to try
and reproduce a similar set of constraints with the Linux devfreq thermal
core.
Instead, set higher temperatures in the GPU trip points corresponding to
the temperatures provided by Qualcomm in the dowstream source, which will
trigger the devfreq thermal core if the GMU cannot handle the temperature
surge, and try our best to avoid reaching the critical temperature trip
point which should trigger an inevitable thermal shutdown.
Fixes: 497624ed5506 ("arm64: dts: qcom: sm8650: Throttle the GPU when overheating")
Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8650.dtsi | 48 ++++++++++++++++++------------------
1 file changed, 24 insertions(+), 24 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi
index 95509ce2713d4fcc3dbe0c5cd5827312d5681af4..e9fcf05cb084b7979ecf0f4712fed332e9f4b07a 100644
--- a/arch/arm64/boot/dts/qcom/sm8650.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi
@@ -6173,19 +6173,19 @@ map0 {
trips {
gpu0_alert0: trip-point0 {
- temperature = <85000>;
+ temperature = <95000>;
hysteresis = <1000>;
type = "passive";
};
trip-point1 {
- temperature = <90000>;
+ temperature = <115000>;
hysteresis = <1000>;
type = "hot";
};
trip-point2 {
- temperature = <110000>;
+ temperature = <125000>;
hysteresis = <1000>;
type = "critical";
};
@@ -6206,19 +6206,19 @@ map0 {
trips {
gpu1_alert0: trip-point0 {
- temperature = <85000>;
+ temperature = <95000>;
hysteresis = <1000>;
type = "passive";
};
trip-point1 {
- temperature = <90000>;
+ temperature = <115000>;
hysteresis = <1000>;
type = "hot";
};
trip-point2 {
- temperature = <110000>;
+ temperature = <125000>;
hysteresis = <1000>;
type = "critical";
};
@@ -6239,19 +6239,19 @@ map0 {
trips {
gpu2_alert0: trip-point0 {
- temperature = <85000>;
+ temperature = <95000>;
hysteresis = <1000>;
type = "passive";
};
trip-point1 {
- temperature = <90000>;
+ temperature = <115000>;
hysteresis = <1000>;
type = "hot";
};
trip-point2 {
- temperature = <110000>;
+ temperature = <125000>;
hysteresis = <1000>;
type = "critical";
};
@@ -6272,19 +6272,19 @@ map0 {
trips {
gpu3_alert0: trip-point0 {
- temperature = <85000>;
+ temperature = <95000>;
hysteresis = <1000>;
type = "passive";
};
trip-point1 {
- temperature = <90000>;
+ temperature = <115000>;
hysteresis = <1000>;
type = "hot";
};
trip-point2 {
- temperature = <110000>;
+ temperature = <125000>;
hysteresis = <1000>;
type = "critical";
};
@@ -6305,19 +6305,19 @@ map0 {
trips {
gpu4_alert0: trip-point0 {
- temperature = <85000>;
+ temperature = <95000>;
hysteresis = <1000>;
type = "passive";
};
trip-point1 {
- temperature = <90000>;
+ temperature = <115000>;
hysteresis = <1000>;
type = "hot";
};
trip-point2 {
- temperature = <110000>;
+ temperature = <125000>;
hysteresis = <1000>;
type = "critical";
};
@@ -6338,19 +6338,19 @@ map0 {
trips {
gpu5_alert0: trip-point0 {
- temperature = <85000>;
+ temperature = <95000>;
hysteresis = <1000>;
type = "passive";
};
trip-point1 {
- temperature = <90000>;
+ temperature = <115000>;
hysteresis = <1000>;
type = "hot";
};
trip-point2 {
- temperature = <110000>;
+ temperature = <125000>;
hysteresis = <1000>;
type = "critical";
};
@@ -6371,19 +6371,19 @@ map0 {
trips {
gpu6_alert0: trip-point0 {
- temperature = <85000>;
+ temperature = <95000>;
hysteresis = <1000>;
type = "passive";
};
trip-point1 {
- temperature = <90000>;
+ temperature = <115000>;
hysteresis = <1000>;
type = "hot";
};
trip-point2 {
- temperature = <110000>;
+ temperature = <125000>;
hysteresis = <1000>;
type = "critical";
};
@@ -6404,19 +6404,19 @@ map0 {
trips {
gpu7_alert0: trip-point0 {
- temperature = <85000>;
+ temperature = <95000>;
hysteresis = <1000>;
type = "passive";
};
trip-point1 {
- temperature = <90000>;
+ temperature = <115000>;
hysteresis = <1000>;
type = "hot";
};
trip-point2 {
- temperature = <110000>;
+ temperature = <125000>;
hysteresis = <1000>;
type = "critical";
};
--
2.34.1
