Re: [PATCH] ARM: dts: qcom: msm8974-hammerhead: Add sdhci1 node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue 19 Jul 23:26 PDT 2016, Bhushan Shah wrote:

> This introduces the eMMC sdhci node and its pinctrl state
> 
> Signed-off-by: Bhushan Shah <bshah@xxxxxxx>

Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>

Regards,
Bjorn

> ---
>  .../dts/qcom-msm8974-lge-nexus5-hammerhead.dts     | 29 ++++++++++++++++++++++
>  1 file changed, 29 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
> index 68f071f..947bd7f 100644
> --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
> +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
> @@ -233,6 +233,35 @@
>  		status = "ok";
>  	};
>  
> +	pinctrl@fd510000 {
> +		sdhc1_pin_a: sdhc1-pin-active {
> +			clk {
> +				pins = "sdc1_clk";
> +				drive-strength = <16>;
> +				bias-disable;
> +			};
> +
> +			cmd-data {
> +				pins = "sdc1_cmd", "sdc1_data";
> +				drive-strength = <10>;
> +				bias-pull-up;
> +			};
> +		};
> +	};
> +
> +	sdhci@f9824900 {
> +		status = "ok";
> +
> +		vmmc-supply = <&pm8941_l20>;
> +		vqmmc-supply = <&pm8941_s3>;
> +
> +		bus-width = <8>;
> +		non-removable;
> +
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&sdhc1_pin_a>;
> +	};
> +
>  	gpio-keys {
>  		compatible = "gpio-keys";
>  		input-name = "gpio-keys";
> -- 
> 2.9.0
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux