On Mon 18 Jul 22:04 PDT 2016, Bhushan Shah wrote:
> vreg_boost is Qualcomm platform specific and is also used in hammerhead
> device.
>
> Cc: Andy Gross <andy.gross@xxxxxxxxxx>
> Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> Cc: David Brown <david.brown@xxxxxxxxxx>
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> Cc: Mark Rutland <mark.rutland@xxxxxxx>
> Cc: Russell King <linux@xxxxxxxxxxxxxxx>
> Cc: linux-arm-msm@xxxxxxxxxxxxxxx
> Cc: linux-soc@xxxxxxxxxxxxxxx
> Cc: devicetree@xxxxxxxxxxxxxxx
> Signed-off-by: Bhushan Shah <bshah@xxxxxxx>
> ---
> arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts | 18 ++----------------
> arch/arm/boot/dts/qcom-msm8974.dtsi | 11 +++++++++++
> arch/arm/boot/dts/qcom-pm8941.dtsi | 6 ++++++
> 3 files changed, 19 insertions(+), 16 deletions(-)
>
> diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
> index a0398b6..8e33fc3 100644
> --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
> +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
> @@ -258,22 +258,13 @@
> };
> };
>
> - vreg_boost: vreg-boost {
> - compatible = "regulator-fixed";
> -
> - regulator-name = "vreg-boost";
> - regulator-min-microvolt = <3150000>;
> - regulator-max-microvolt = <3150000>;
> -
> - regulator-always-on;
> - regulator-boot-on;
> -
> + vreg_boost {
> gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
> enable-active-high;
>
> pinctrl-names = "default";
> pinctrl-0 = <&boost_bypass_n_pin>;
> - };
> + };
This part is Qualcomm reference design and I think we should just move
the entire node to the dtsi. Sorry if I wasn't clearer.
Regards,
Bjorn
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
