On 12/20/2024 3:15 PM, Konrad Dybcio wrote:
> On 20.12.2024 8:25 AM, Manikanta Mylavarapu wrote:
>>
>>
>> On 12/20/2024 2:06 AM, Konrad Dybcio wrote:
>>> On 17.12.2024 10:13 AM, Manikanta Mylavarapu wrote:
>>>> Add SPI0 node for IPQ5424 SoC.
>>>>
>>>> Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
>>>> ---
>>>> Changes in V2:
>>>> - No change
>>>>
>>>> arch/arm64/boot/dts/qcom/ipq5424.dtsi | 11 +++++++++++
>>>> 1 file changed, 11 insertions(+)
>>>>
>>>> diff --git a/arch/arm64/boot/dts/qcom/ipq5424.dtsi b/arch/arm64/boot/dts/qcom/ipq5424.dtsi
>>>> index 5e219f900412..b4d736cd8610 100644
>>>> --- a/arch/arm64/boot/dts/qcom/ipq5424.dtsi
>>>> +++ b/arch/arm64/boot/dts/qcom/ipq5424.dtsi
>>>> @@ -201,6 +201,17 @@ uart1: serial@1a84000 {
>>>> clock-names = "se";
>>>> interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
>>>> };
>>>> +
>>>> + spi0: spi@1a90000 {
>>>> + compatible = "qcom,geni-spi";
>>>> + reg = <0 0x01a90000 0 0x4000>;
>>>> + clocks = <&gcc GCC_QUPV3_SPI0_CLK>;
>>>
>>> This register base suggests SPI4 for both the name and clock
>>>
>>
>> Hi Konrad,
>>
>> Thank you for reviewing the patch.
>>
>> The IPQ5424 doesn't have SPI4, and according to the Qualcomm IPQ5424 register catalog,
>> the register base maps to SPI0.
>
> I'm looking at that register catalog and what you added here is
> called SE4
>
I understand your point and will rename it to SPI4.
Thanks & Regards,
Manikanta.
>>
>>> The existing UART1 similarly should be UART0
>>
>> I didn't understand your comment. UART0 not yet posted.
>> In IPQ5424, UART1 is the main UART used for console
>> and UART0 is HS-UART used for some debugging purpose.
>
> Here it's my mistake, 0x01a84000 is SE1 indeed
>
> Konrad
