Add the lid switch for the Lenovo Yoga Slim 7x.
Other x1e80100 laptops use the GPIO pin 92 only, however on the Yoga
Slim 7x this pin seems to be bridged with the pin 71. By default, the
pin 71 is set as output-high, which blocks any event on pin 92.
This patch sets the pin 71 as output-disable and sets the LID switch on
pin 92. This is aligned with how they're configured on Windows:
GPIO 71 | 0xf147000 | in | func0 | hi | pull up | 16 mA |
ctl=0x000001c3 io=0x00000003
GPIO 92 | 0xf15c000 | in | func0 | lo | no pull | 2 mA |
ctl=0x00000000 io=0x00000001
Signed-off-by: Anthony Ruhier <aruhier@xxxxxxxxxxx>
---
.../dts/qcom/x1e80100-lenovo-yoga-slim7x.dts | 38 +++++++++++++++++++
1 file changed, 38 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
index ca5a808f2c7d..311202aa9015 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
@@ -6,6 +6,7 @@
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "x1e80100.dtsi"
@@ -19,6 +20,21 @@ aliases {
serial0 = &uart21;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&hall_int_n_default>;
+ pinctrl-names = "default";
+
+ switch-lid {
+ gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_LID>;
+ wakeup-source;
+ wakeup-event-action = <EV_ACT_DEASSERTED>;
+ };
+ };
+
chosen {
stdout-path = "serial0:115200n8";
};
@@ -811,6 +827,28 @@ edp_reg_en: edp-reg-en-state {
bias-disable;
};
+ hall_int_n_default: hall-int-n-state {
+ lid-n-pins {
+ pins = "gpio92";
+ function = "gpio";
+ bias-disable;
+ };
+
+ /*
+ * Pins 71 and 92 seem to be bridged together (pin 71 and 92 show the
same
+ * events). By default, pin 71 is set as output-high, which blocks any
+ * event on pin 92. Output-disable on pin 71 is necessary to get
events on
+ * pin 92.
+ * The purpose of pin 71 is not yet known; lid-pull is a supposition.
+ */
+ lid-pull-n-pins {
+ pins = "gpio71";
+ function = "gpio";
+ bias-pull-up;
+ output-disable;
+ };
+ };
+
kybd_default: kybd-default-state {
pins = "gpio67";
function = "gpio";
--
2.47.1
