Re: [PATCH v9 3/7] thermal/drivers/tsens: Add TSENS enable and calibration support for V2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 12/14/2024 12:32 AM, Christophe JAILLET wrote:
> Le 25/11/2024 à 06:07, Manikanta Mylavarapu a écrit :
>> From: Praveenkumar I <quic_ipkumar-jfJNa2p1gH1BDgjK7y7TUQ@xxxxxxxxxxxxxxxx>
>>
>> SoCs without RPM need to enable sensors and calibrate them from the kernel.
>> The IPQ5332 and IPQ5424 use the tsens v2.3.3 IP and do not have RPM.
>> Therefore, add a new calibration function for V2, as the tsens.c calib
>> function only supports V1. Also add new feature_config, ops and data for
>> IPQ5332, IPQ5424.
>>
>> Although the TSENS IP supports 16 sensors, not all are used. The hw_id
>> is used to enable the relevant sensors.
> 
> ...
> 
>> diff --git a/drivers/thermal/qcom/tsens-v2.c b/drivers/thermal/qcom/tsens-v2.c
>> index 0cb7301eca6e..836155fa9ab2 100644
>> --- a/drivers/thermal/qcom/tsens-v2.c
>> +++ b/drivers/thermal/qcom/tsens-v2.c
>> @@ -4,13 +4,32 @@
>>    * Copyright (c) 2018, Linaro Limited
>>    */
>>   +#include <linux/bitfield.h>
>>   #include <linux/bitops.h>
>>   #include <linux/regmap.h>
>> +#include <linux/nvmem-consumer.h>
> 
> If moved one line above, alphabetical order would be kept.
> 

Sure, i will update in the next version.

>>   #include "tsens.h"
>>     /* ----- SROT ------ */
>>   #define SROT_HW_VER_OFF    0x0000
> 
> ...
> 
>> +static const struct tsens_ops ops_ipq5332 = {
>> +    .init        = init_tsens_v2_no_rpm,
>> +    .get_temp    = get_temp_tsens_valid,
>> +    .calibrate    = tsens_v2_calibration,
>> +};
>> +
>> +struct tsens_plat_data data_ipq5332 = {
> 
> This could easily be made as const.
> 

Sure, i will update in the next version.

>> +    .num_sensors    = 5,
>> +    .ops        = &ops_ipq5332,
>> +    .hw_ids        = (unsigned int []){11, 12, 13, 14, 15},
>> +    .feat        = &ipq5332_feat,
>> +    .fields        = tsens_v2_regfields,
>> +};
>> +
>> +struct tsens_plat_data data_ipq5424 = {
> 
> This could easily be made as const.
> 

Sure, i will update in the next version.

Thanks & Regards,
Manikanta.

>> +    .num_sensors    = 7,
>> +    .ops        = &ops_ipq5332,
>> +    .hw_ids        = (unsigned int []){9, 10, 11, 12, 13, 14, 15},
>> +    .feat        = &ipq5332_feat,
>> +    .fields        = tsens_v2_regfields,
>> +};
> 
> ...
> 
> CJ





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux