Add SDHC1 and SDHC2 support to the QCS615 Ride platform. The SDHC1 and SDHC2 of QCS615 are derived from SM6115. Include the configuration of SDHC1-related and SDHC2-related opp, power, and interconnect settings in the device tree. Signed-off-by: Yuanjie Yang <quic_yuanjiey@xxxxxxxxxxx> --- This patch series depends on below patch series: - gcc: https://lore.kernel.org/all/20241022-qcs615-clock-driver-v4-0-3d716ad0d987@xxxxxxxxxxx/ Changes in v5: - Modify SDHC1 and SDHC2 interconnects, for the cpu path, use QCOM_ICC_TAG_ACTIVE_ONLY to replace QCOM_ICC_TAG_ALWAYS - For SDHC1 and SDHC2, Add a newline before status - Rebase Change on tag: next-20241217 - Modify dependency changes - Link to v4: https://lore.kernel.org/all/20241206023711.2541716-1-quic_yuanjiey@xxxxxxxxxxx/ Changes in v4: - Move properties which are not properties of the SoC to board DTS - Add ice region to SDHC1 Node reg - Add 50Mhz 200Mhz to SDHC1 opp table, add 50Mhz to SDHC2 opp table - fix SDHC2 Node compatible space - Link to v3: https://lore.kernel.org/all/20241122065101.1918470-1-quic_yuanjiey@xxxxxxxxxxx/ Changes in v3: - Improve the commit messages and cover letter - Link to v2: https://lore.kernel.org/all/20241106072343.2070933-1-quic_yuanjiey@xxxxxxxxxxx/ Changes in v2: - Improve the commit messages and cover letter - Remove applied patches 1 - Pad sdhc_1 node and sdhc_2 node register addresses to 8 hex digits - Adjust sdhc_1 node and sdhc_2 node register addresses to hexadecimal - Modify sdhc_2 vqmmc-supply incorrect power configuration - Link to v1: https://lore.kernel.org/all/20241023092708.604195-1-quic_yuanjiey@xxxxxxxxxxx/ --- Yuanjie Yang (2): arm64: dts: qcom: qcs615: add SDHC1 and SDHC2 arm64: dts: qcom: qcs615-ride: enable SDHC1 and SDHC2 arch/arm64/boot/dts/qcom/qcs615-ride.dts | 37 ++++ arch/arm64/boot/dts/qcom/qcs615.dtsi | 211 +++++++++++++++++++++++ 2 files changed, 248 insertions(+) -- 2.34.1
