On Thu, Jul 07, 2016 at 03:21:13PM -0700, Stephen Boyd wrote: > The high-speed phy on qcom SoCs is controlled via the ULPI > viewport. > > Cc: Kishon Vijay Abraham I <kishon@xxxxxx> > Cc: <devicetree@xxxxxxxxxxxxxxx> > Signed-off-by: Stephen Boyd <stephen.boyd@xxxxxxxxxx> > --- > .../devicetree/bindings/phy/qcom,usb-hs-phy.txt | 83 ++++++ > drivers/phy/Kconfig | 8 + > drivers/phy/Makefile | 1 + > drivers/phy/phy-qcom-usb-hs.c | 295 +++++++++++++++++++++ > 4 files changed, 387 insertions(+) > create mode 100644 Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt > create mode 100644 drivers/phy/phy-qcom-usb-hs.c > > diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt > new file mode 100644 > index 000000000000..a7bda9186d5b > --- /dev/null > +++ b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt > @@ -0,0 +1,83 @@ > +Qualcomm's USB HS PHY > + > +PROPERTIES > + > +- compatible: > + Usage: required > + Value type: <string> > + Definition: Should contain "qcom,usb-hs-phy" Add a chip specific compatible. Rob -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
