[PATCH v3 04/23] arm64: dts: qcom: sm8450: Fix ADSP memory base and length

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The address space in ADSP PAS (Peripheral Authentication Service)
remoteproc node should point to the QDSP PUB address space
(QDSP6...SS_PUB): 0x0300_0000 with length of 0x10000, which also matches
downstream DTS.  0x3000_0000, value used so far, was in datasheet is the
region of CDSP.

Correct the base address and length, which also moves the node to
different place to keep things sorted by unit address.  The diff looks
big, but only the unit address and "reg" property were changed.  This
should have no functional impact on Linux users, because PAS loader does
not use this address space at all.

Fixes: 1172729576fb ("arm64: dts: qcom: sm8450: Add remoteproc enablers and instances")
Cc: stable@xxxxxxxxxxxxxxx
Reviewed-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sm8450.dtsi | 212 +++++++++++++++++------------------
 1 file changed, 106 insertions(+), 106 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 53147aa6f7e4acb102dd5dee51f0aec164b971c7..d028079c11bdc2dd2b254f7f7d85e315a86f79bc 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -2496,6 +2496,112 @@ compute-cb@3 {
 			};
 		};
 
+		remoteproc_adsp: remoteproc@3000000 {
+			compatible = "qcom,sm8450-adsp-pas";
+			reg = <0x0 0x03000000 0x0 0x10000>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_LCX>,
+					<&rpmhpd RPMHPD_LMX>;
+			power-domain-names = "lcx", "lmx";
+
+			memory-region = <&adsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			remoteproc_adsp_glink: glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+
+				gpr {
+					compatible = "qcom,gpr";
+					qcom,glink-channels = "adsp_apps";
+					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+					qcom,intents = <512 20>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					q6apm: service@1 {
+						compatible = "qcom,q6apm";
+						reg = <GPR_APM_MODULE_IID>;
+						#sound-dai-cells = <0>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6apmdai: dais {
+							compatible = "qcom,q6apm-dais";
+							iommus = <&apps_smmu 0x1801 0x0>;
+						};
+
+						q6apmbedai: bedais {
+							compatible = "qcom,q6apm-lpass-dais";
+							#sound-dai-cells = <1>;
+						};
+					};
+
+					q6prm: service@2 {
+						compatible = "qcom,q6prm";
+						reg = <GPR_PRM_MODULE_IID>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6prmcc: clock-controller {
+							compatible = "qcom,q6prm-lpass-clocks";
+							#clock-cells = <2>;
+						};
+					};
+				};
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "adsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1803 0x0>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1804 0x0>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1805 0x0>;
+					};
+				};
+			};
+		};
+
 		wsa2macro: codec@31e0000 {
 			compatible = "qcom,sm8450-lpass-wsa-macro";
 			reg = <0 0x031e0000 0 0x1000>;
@@ -2692,112 +2798,6 @@ vamacro: codec@33f0000 {
 			status = "disabled";
 		};
 
-		remoteproc_adsp: remoteproc@30000000 {
-			compatible = "qcom,sm8450-adsp-pas";
-			reg = <0 0x30000000 0 0x100>;
-
-			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
-					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog", "fatal", "ready",
-					  "handover", "stop-ack";
-
-			clocks = <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "xo";
-
-			power-domains = <&rpmhpd RPMHPD_LCX>,
-					<&rpmhpd RPMHPD_LMX>;
-			power-domain-names = "lcx", "lmx";
-
-			memory-region = <&adsp_mem>;
-
-			qcom,qmp = <&aoss_qmp>;
-
-			qcom,smem-states = <&smp2p_adsp_out 0>;
-			qcom,smem-state-names = "stop";
-
-			status = "disabled";
-
-			remoteproc_adsp_glink: glink-edge {
-				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
-							     IPCC_MPROC_SIGNAL_GLINK_QMP
-							     IRQ_TYPE_EDGE_RISING>;
-				mboxes = <&ipcc IPCC_CLIENT_LPASS
-						IPCC_MPROC_SIGNAL_GLINK_QMP>;
-
-				label = "lpass";
-				qcom,remote-pid = <2>;
-
-				gpr {
-					compatible = "qcom,gpr";
-					qcom,glink-channels = "adsp_apps";
-					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
-					qcom,intents = <512 20>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					q6apm: service@1 {
-						compatible = "qcom,q6apm";
-						reg = <GPR_APM_MODULE_IID>;
-						#sound-dai-cells = <0>;
-						qcom,protection-domain = "avs/audio",
-									 "msm/adsp/audio_pd";
-
-						q6apmdai: dais {
-							compatible = "qcom,q6apm-dais";
-							iommus = <&apps_smmu 0x1801 0x0>;
-						};
-
-						q6apmbedai: bedais {
-							compatible = "qcom,q6apm-lpass-dais";
-							#sound-dai-cells = <1>;
-						};
-					};
-
-					q6prm: service@2 {
-						compatible = "qcom,q6prm";
-						reg = <GPR_PRM_MODULE_IID>;
-						qcom,protection-domain = "avs/audio",
-									 "msm/adsp/audio_pd";
-
-						q6prmcc: clock-controller {
-							compatible = "qcom,q6prm-lpass-clocks";
-							#clock-cells = <2>;
-						};
-					};
-				};
-
-				fastrpc {
-					compatible = "qcom,fastrpc";
-					qcom,glink-channels = "fastrpcglink-apps-dsp";
-					label = "adsp";
-					qcom,non-secure-domain;
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					compute-cb@3 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <3>;
-						iommus = <&apps_smmu 0x1803 0x0>;
-					};
-
-					compute-cb@4 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <4>;
-						iommus = <&apps_smmu 0x1804 0x0>;
-					};
-
-					compute-cb@5 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <5>;
-						iommus = <&apps_smmu 0x1805 0x0>;
-					};
-				};
-			};
-		};
-
 		remoteproc_cdsp: remoteproc@32300000 {
 			compatible = "qcom,sm8450-cdsp-pas";
 			reg = <0 0x32300000 0 0x1400000>;

-- 
2.43.0





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux