On Fri, 13 Dec 2024 at 08:59, Song Xue <quic_songxue@xxxxxxxxxxx> wrote:
>
>
>
> On 12/13/2024 2:14 AM, Konrad Dybcio wrote:
> > On 11.12.2024 9:26 AM, Song Xue wrote:
> >> From: Krishna Kurapati <krishna.kurapati@xxxxxxxxxxxxxxxx>
> >>
> >> Enable secondary USB controller on QCS615 Ride platform. The secondary
> >> USB controller is made "host", as it is a Type-A port.
> >>
> >> Signed-off-by: Krishna Kurapati <krishna.kurapati@xxxxxxxxxxxxxxxx>
> >> Co-developed-by: Song Xue <quic_songxue@xxxxxxxxxxx>
> >> Signed-off-by: Song Xue <quic_songxue@xxxxxxxxxxx>
> >> ---
> >> arch/arm64/boot/dts/qcom/qcs615-ride.dts | 28 ++++++++++++++++++++++++++++
> >> 1 file changed, 28 insertions(+)
> >>
> >> diff --git a/arch/arm64/boot/dts/qcom/qcs615-ride.dts b/arch/arm64/boot/dts/qcom/qcs615-ride.dts
> >> index f41319ff47b983d771da52775fa78b4385c4e532..26ce0496d13ccbfea392c6d50d9edcab85fbc653 100644
> >> --- a/arch/arm64/boot/dts/qcom/qcs615-ride.dts
> >> +++ b/arch/arm64/boot/dts/qcom/qcs615-ride.dts
> >> @@ -203,6 +203,15 @@ &gcc {
> >> <&sleep_clk>;
> >> };
> >>
> >> +&pm8150_gpios {
> >> + usb2_en_state: usb2-en-state {
> >> + pins = "gpio10";
> >> + function = "normal";
> >> + output-high;
> >> + power-source = <0>;
> >> + };
> >
> > Does this go to an enable pin of a vreg / switch?
>
> Thanks for comment.
> We go to enable the pin of PMIC chip. The pin of PMIC is connecting to
> host-enable pin of USB converter. Need pin of PMIC chip to be high
> level, when USB is as host mode.
What kind of USB converter are we talking about?
> >
> > I think we settled on describing such cases as fixed regulators
> > (that are always-on for now) - would you remember, +Dmitry?
> >
> > The rest looks good.
> >
> > Konrad
>
--
With best wishes
Dmitry
