From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
Make sure the remoteproc reg ranges reflect the entire register space
they refer to.
Since they're unused by the driver, there's no functional change.
Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform")
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index ef06d1ac084d3205a149feff880f457822dca2b4..c97d1eeaf890f7ac2814297bff299c0bdd0ddd04 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -2743,7 +2743,7 @@ usb_2_qmpphy1: phy@88f1000 {
remoteproc_adsp: remoteproc@3000000 {
compatible = "qcom,sc8280xp-adsp-pas";
- reg = <0 0x03000000 0 0x100>;
+ reg = <0 0x03000000 0 0x10000>;
interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
<&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -5254,7 +5254,7 @@ cpufreq_hw: cpufreq@18591000 {
remoteproc_nsp0: remoteproc@1b300000 {
compatible = "qcom,sc8280xp-nsp0-pas";
- reg = <0 0x1b300000 0 0x100>;
+ reg = <0 0x1b300000 0 0x10000>;
interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
<&smp2p_nsp0_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -5385,7 +5385,7 @@ compute-cb@14 {
remoteproc_nsp1: remoteproc@21300000 {
compatible = "qcom,sc8280xp-nsp1-pas";
- reg = <0 0x21300000 0 0x100>;
+ reg = <0 0x21300000 0 0x10000>;
interrupts-extended = <&intc GIC_SPI 887 IRQ_TYPE_EDGE_RISING>,
<&smp2p_nsp1_in 0 IRQ_TYPE_EDGE_RISING>,
---
base-commit: 3e42dc9229c5950e84b1ed705f94ed75ed208228
change-id: 20241212-topic-8280_rproc_reg-15c636427963
Best regards,
--
Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
