Add LOCK and UNLOCK flag support while preapring
command descriptor for writing crypto register.
added qce_bam_acquire_lock() and qce_bam_release_lock()
which will do dummy write to a crypto register for
acquiring lock and releaseing lock.
Signed-off-by: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
---
Change in [v5]
* No change
Change in [v4]
* Added qce_bam_acquire_lock() and qce_bam_release_lock()
api
Change in [v3]
* No change
Change in [v2]
* Added initial support for LOCK/UNLOCK flag
on command descriptor
Change in [v1]
* This patch was not included in [v1]
drivers/crypto/qce/common.c | 35 +++++++++++++++++++++++++++++++++++
drivers/crypto/qce/core.h | 2 ++
drivers/crypto/qce/dma.c | 7 ++++++-
drivers/crypto/qce/dma.h | 2 ++
4 files changed, 45 insertions(+), 1 deletion(-)
diff --git a/drivers/crypto/qce/common.c b/drivers/crypto/qce/common.c
index ff96f6ba1fc5..dad12e15905f 100644
--- a/drivers/crypto/qce/common.c
+++ b/drivers/crypto/qce/common.c
@@ -588,6 +588,41 @@ int qce_start(struct crypto_async_request *async_req, u32 type)
#define STATUS_ERRORS \
(BIT(SW_ERR_SHIFT) | BIT(AXI_ERR_SHIFT) | BIT(HSD_ERR_SHIFT))
+int qce_bam_acquire_lock(struct qce_device *qce)
+{
+ int ret;
+
+ qce_clear_bam_transaction(qce);
+
+ /* This is just a dummy write to acquire lock on bam pipe */
+ qce_write_reg_dma(qce, REG_AUTH_SEG_CFG, 0, 1);
+ ret = qce_submit_cmd_desc(qce, QCE_DMA_DESC_FLAG_LOCK);
+ if (ret) {
+ dev_err(qce->dev, "Error in Locking cmd descriptor\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+int qce_bam_release_lock(struct qce_device *qce)
+{
+ int ret;
+
+ qce_clear_bam_transaction(qce);
+
+ /* This just dummy write to release lock on bam pipe*/
+ qce_write_reg_dma(qce, REG_AUTH_SEG_CFG, 0, 1);
+
+ ret = qce_submit_cmd_desc(qce, QCE_DMA_DESC_FLAG_UNLOCK);
+ if (ret) {
+ dev_err(qce->dev, "Error in Un-Locking cmd descriptor\n");
+ return ret;
+ }
+
+ return 0;
+}
+
int qce_check_status(struct qce_device *qce, u32 *status)
{
int ret = 0;
diff --git a/drivers/crypto/qce/core.h b/drivers/crypto/qce/core.h
index bf28dedd1509..d01d810b60ad 100644
--- a/drivers/crypto/qce/core.h
+++ b/drivers/crypto/qce/core.h
@@ -68,4 +68,6 @@ int qce_read_reg_dma(struct qce_device *qce, unsigned int offset, void *buff,
void qce_clear_bam_transaction(struct qce_device *qce);
int qce_submit_cmd_desc(struct qce_device *qce, unsigned long flags);
struct qce_bam_transaction *qce_alloc_bam_txn(struct qce_dma_data *dma);
+int qce_bam_acquire_lock(struct qce_device *qce);
+int qce_bam_release_lock(struct qce_device *qce);
#endif /* _CORE_H_ */
diff --git a/drivers/crypto/qce/dma.c b/drivers/crypto/qce/dma.c
index e4e672d65302..93d455d1d5b4 100644
--- a/drivers/crypto/qce/dma.c
+++ b/drivers/crypto/qce/dma.c
@@ -72,7 +72,12 @@ int qce_submit_cmd_desc(struct qce_device *qce, unsigned long flags)
unsigned long desc_flags;
int ret = 0;
- desc_flags = DMA_PREP_CMD;
+ if (flags & QCE_DMA_DESC_FLAG_LOCK)
+ desc_flags = DMA_PREP_CMD | DMA_PREP_LOCK;
+ else if (flags & QCE_DMA_DESC_FLAG_UNLOCK)
+ desc_flags = DMA_PREP_CMD | DMA_PREP_UNLOCK;
+ else
+ desc_flags = DMA_PREP_CMD;
/* For command descriptor always use consumer pipe
* it recomended as per HPG
diff --git a/drivers/crypto/qce/dma.h b/drivers/crypto/qce/dma.h
index f10991590b3f..ad8a18a720b1 100644
--- a/drivers/crypto/qce/dma.h
+++ b/drivers/crypto/qce/dma.h
@@ -19,6 +19,8 @@
#define QCE_BAM_CMD_ELEMENT_SIZE 64
#define QCE_DMA_DESC_FLAG_BAM_NWD (0x0004)
#define QCE_MAX_REG_READ 8
+#define QCE_DMA_DESC_FLAG_LOCK (0x0002)
+#define QCE_DMA_DESC_FLAG_UNLOCK (0x0001)
struct qce_result_dump {
u32 auth_iv[QCE_AUTHIV_REGS_CNT];
--
2.34.1
