[PATCH v5 4/4] power: sequencing: qcom-wcn: add support for the WCN6750 PMU

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Enable support for controlling the power-up sequence of the PMU inside
the WCN6750 model.

Signed-off-by: Janaki Ramaiah Thota <quic_janathot@xxxxxxxxxxx>
---
 drivers/power/sequencing/pwrseq-qcom-wcn.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/drivers/power/sequencing/pwrseq-qcom-wcn.c b/drivers/power/sequencing/pwrseq-qcom-wcn.c
index 682a9beac69e..cc03b5aaa8f2 100644
--- a/drivers/power/sequencing/pwrseq-qcom-wcn.c
+++ b/drivers/power/sequencing/pwrseq-qcom-wcn.c
@@ -272,6 +272,24 @@ static const struct pwrseq_qcom_wcn_pdata pwrseq_qca6390_of_data = {
 	.targets = pwrseq_qcom_wcn_targets,
 };
 
+static const char *const pwrseq_wcn6750_vregs[] = {
+	"vddaon",
+	"vddasd",
+	"vddpmu",
+	"vddrfa0p8",
+	"vddrfa1p2",
+	"vddrfa1p7",
+	"vddrfa2p2",
+};
+
+static const struct pwrseq_qcom_wcn_pdata pwrseq_wcn6750_of_data = {
+	.vregs = pwrseq_wcn6750_vregs,
+	.num_vregs = ARRAY_SIZE(pwrseq_wcn6750_vregs),
+	.pwup_delay_ms = 50,
+	.gpio_enable_delay_ms = 5,
+	.targets = pwrseq_qcom_wcn_targets,
+};
+
 static const char *const pwrseq_wcn6855_vregs[] = {
 	"vddio",
 	"vddaon",
@@ -431,6 +449,10 @@ static const struct of_device_id pwrseq_qcom_wcn_of_match[] = {
 		.compatible = "qcom,wcn7850-pmu",
 		.data = &pwrseq_wcn7850_of_data,
 	},
+	{
+		.compatible = "qcom,wcn6750-pmu",
+		.data = &pwrseq_wcn6750_of_data,
+	},
 	{ }
 };
 MODULE_DEVICE_TABLE(of, pwrseq_qcom_wcn_of_match);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux