Re: [PATCH] pinctrl: qcom: establish proper EBI2 pin groups

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jul 08, 2016 at 01:15:29AM +0200, Linus Walleij wrote:
> After some digging around I found documentation (!) of the APQ8060
> EBI2 pin groups. It turns out I first need to split the group in
> two: ebi2cs and ebi2 proper. The chip select pins are kind of
> orthogonal to the other EBI2 pins since CS1B and CS2B can be muxed
> over address bits 7 and 6 (don't know why, but they can). This
> is good to fix up before we add users.
> 
> Also found what the "holes" in the assignment all the way up to
> gpio158 was actually for.
> 
> All mux documentation comes from "Snapdragon(TM) S3 APQ8060-based
> DragonBoard(TM) GPIO User Guide Rev. E August 10, 2012", published
> by Bsquare Corporation.
> 
> As the documentation seems a bit hard to come by I put some comments
> in the group definitions so that it is clear to all readers what
> is going on here and what the lines are used for.
> 
> Cc: Björn Andersson <bjorn.andersson@xxxxxxxxxx>
> Cc: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
> Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
> ---

Seems reasonable.  I'd presume the Documentation needs updating too for the new
groups.

Reviewed-by: Andy Gross <andy.gross@xxxxxxxxxx>
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux