On 12/5/2024 1:42 PM, Krzysztof Kozlowski wrote:
On 05/12/2024 09:06, Sricharan R wrote:
From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
This binding describes the component responsible for communication
between the TME-L server based subsystems (Q6) and the TME-L client
(APPSS/BTSS/AUDIOSS), used for security services like secure image
authentication, enable/disable efuses, crypto services. Each client
in the SoC has its own block of message RAM and IRQ for communication
with the TME-L SS. The protocol used to communicate in the message RAM
is known as Qualcomm Messaging Protocol (QMP).
This is RFC, so only limited review follows. I will review more once
this is ready for review.
Thanks. Once i get the design/approach confirmed, will post the V1.
Signed-off-by: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
---
.../bindings/mailbox/qcom,tmelite-qmp.yaml | 70 +++++++++++++++++++
1 file changed, 70 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mailbox/qcom,tmelite-qmp.yaml
diff --git a/Documentation/devicetree/bindings/mailbox/qcom,tmelite-qmp.yaml b/Documentation/devicetree/bindings/mailbox/qcom,tmelite-qmp.yaml
new file mode 100644
index 000000000000..1f2b3e02b894
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/qcom,tmelite-qmp.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/qcom,tmelite-qmp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm TMELITE IPCC channel
+
+maintainers:
+ - Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
+
+description:
+ This binding describes the component responsible for communication
Describe the hardware, not the binding.
ho ok, will fix and move the hardware description here.
+ between the TME-L server based subsystems (Q6) and the TME-L client
+ (APPSS/BTSS/AUDIOSS), used for security services like secure image
+ authentication, enable/disable efuses, crypto services. Each client
+ in the SoC has its own block of message RAM and IRQ for communication
+ with the TME-L SS. The protocol used to communicate in the message RAM
+ is known as Qualcomm Messaging Protocol (QMP).
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - qcom,ipq5424-tmelite-qmp
+ - const: qcom,tmelite-qmp
Drop generic compatible.
ok
+
+ reg:
+ maxItems: 1
+ description:
+ The base address and size of the message RAM for this client's
+ communication with the TMELITE core
Drop obvious description. Same everywhere else.
ok
+
+ interrupts:
+ maxItems: 1
+ description:
+ Should specify the TMELITE message IRQ for this client
+
+ mboxes:
+ maxItems: 1
+ description:
+ Reference to the mailbox representing the outgoing doorbell in APCS for
+ this client, as described in mailbox/mailbox.txt
+
+ "#mbox-cells":
+ const: 2
+ description:
+ The first cell is the client-id, and the second cell is the signal-id.
I guess that's the only description not stating obvious.
ok
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - mboxes
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ tmel_qmp: qmp@32090000 {
Node names should be generic. See also an explanation and list of
examples (not exhaustive) in DT specification:
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
ho ok, will fix
+ compatible = "qcom,ipq5424-tmelite-qmp", "qcom,tmelite-qmp";
Use 4 spaces for example indentation.
ok
Regards,
Sricharan