On Wed, Dec 04, 2024 at 06:47:06PM +0530, Janaki Ramaiah Thota wrote:
> Enable support for controlling the power-up sequence of the PMU inside
> the WCN6750 model.
>
> Signed-off-by: Janaki Ramaiah Thota <quic_janathot@xxxxxxxxxxx>
> ---
> drivers/power/sequencing/pwrseq-qcom-wcn.c | 22 ++++++++++++++++++++++
> 1 file changed, 22 insertions(+)
>
> diff --git a/drivers/power/sequencing/pwrseq-qcom-wcn.c b/drivers/power/sequencing/pwrseq-qcom-wcn.c
> index 682a9beac69e..e38da79f0ada 100644
> --- a/drivers/power/sequencing/pwrseq-qcom-wcn.c
> +++ b/drivers/power/sequencing/pwrseq-qcom-wcn.c
> @@ -293,6 +293,24 @@ static const struct pwrseq_qcom_wcn_pdata pwrseq_wcn6855_of_data = {
> .targets = pwrseq_qcom_wcn6855_targets,
> };
>
> +static const char *const pwrseq_wcn6750_vregs[] = {
> + "vddaon",
> + "vddasd",
> + "vddpmu",
> + "vddrfa0p8",
> + "vddrfa1p2",
> + "vddrfa1p7",
> + "vddrfa2p2",
> +};
> +
> +static const struct pwrseq_qcom_wcn_pdata pwrseq_wcn6750_of_data = {
> + .vregs = pwrseq_wcn6750_vregs,
> + .num_vregs = ARRAY_SIZE(pwrseq_wcn6750_vregs),
> + .pwup_delay_ms = 50,
> + .gpio_enable_delay_ms = 5,
> + .targets = pwrseq_qcom_wcn_targets,
> +};
> +
> static const char *const pwrseq_wcn7850_vregs[] = {
> "vdd",
> "vddio",
> @@ -431,6 +449,10 @@ static const struct of_device_id pwrseq_qcom_wcn_of_match[] = {
> .compatible = "qcom,wcn7850-pmu",
> .data = &pwrseq_wcn7850_of_data,
> },
> + {
> + .compatible = "qcom,wcn6750-pmu",
Don't stuff things at the end of lists. Keep proper order instead.
Best regards,
Krzysztof
