[PATCH 1/3] drm/msm/dp: account for widebus in msm_dp_catalog_panel_tpg_enable()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Adjust the h_active calculation to account for widebus in tpg.

Fixes: 757a2f36ab09 ("drm/msm/dp: enable widebus feature for display port")
Signed-off-by: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
---
 drivers/gpu/drm/msm/dp/dp_catalog.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/dp/dp_catalog.c b/drivers/gpu/drm/msm/dp/dp_catalog.c
index b4c8856fb25d..05c8e1996f60 100644
--- a/drivers/gpu/drm/msm/dp/dp_catalog.c
+++ b/drivers/gpu/drm/msm/dp/dp_catalog.c
@@ -1011,9 +1011,21 @@ void msm_dp_catalog_panel_tpg_enable(struct msm_dp_catalog *msm_dp_catalog,
 	u32 v_sync_width;
 	u32 hsync_ctl;
 	u32 display_hctl;
+	u32 h_sync_width;
+	u32 h_front_porch;
+	u32 h_back_porch;
+	u32 h_active;
+
+	h_active = drm_mode->hdisplay;
+	h_back_porch = drm_mode->htotal - drm_mode->hsync_end;
+	h_sync_width = drm_mode->htotal - (drm_mode->hsync_start + h_back_porch);
+	h_front_porch = drm_mode->hsync_start - drm_mode->hdisplay;
+
+	if (msm_dp_catalog->wide_bus_en)
+		h_active /= 2;
 
 	/* TPG config parameters*/
-	hsync_period = drm_mode->htotal;
+	hsync_period = h_sync_width + h_back_porch + h_active + h_front_porch;
 	vsync_period = drm_mode->vtotal;
 
 	display_v_start = ((drm_mode->vtotal - drm_mode->vsync_start) *

-- 
2.34.1





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux