[PATCH v7 2/3] drm/msm/dpu: allow using two SSPP blocks for a single plane

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Virtual wide planes give high amount of flexibility, but it is not
always enough:

In parallel multirect case only the half of the usual width is supported
for tiled formats. Thus the whole width of two tiled multirect
rectangles can not be greater than max_linewidth, which is not enough
for some platforms/compositors.

Another example is as simple as wide YUV plane. YUV planes can not use
multirect, so currently they are limited to max_linewidth too.

Now that the planes are fully virtualized, add support for allocating
two SSPP blocks to drive a single DRM plane. This fixes both mentioned
cases and allows all planes to go up to 2*max_linewidth (at the cost of
making some of the planes unavailable to the user).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 144 ++++++++++++++++++++----------
 1 file changed, 98 insertions(+), 46 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
index 309a8cdaafcf3dacd1c7ba4e0cddb7f3f56423c0..098abc2c0003cde90ce6219c97ee18fa055a92a5 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
@@ -20,7 +20,6 @@
 #include "msm_drv.h"
 #include "msm_mdss.h"
 #include "dpu_kms.h"
-#include "dpu_formats.h"
 #include "dpu_hw_sspp.h"
 #include "dpu_hw_util.h"
 #include "dpu_trace.h"
@@ -888,6 +887,32 @@ static int dpu_plane_atomic_check_nosspp(struct drm_plane *plane,
 	return 0;
 }
 
+static int dpu_plane_is_multirect_parallel_capable(struct dpu_hw_sspp *sspp,
+						   struct dpu_sw_pipe_cfg *pipe_cfg,
+						   const struct msm_format *fmt,
+						   uint32_t max_linewidth)
+{
+	if (drm_rect_width(&pipe_cfg->src_rect) != drm_rect_width(&pipe_cfg->dst_rect) ||
+	    drm_rect_height(&pipe_cfg->src_rect) != drm_rect_height(&pipe_cfg->dst_rect))
+		return false;
+
+	if (pipe_cfg->rotation & DRM_MODE_ROTATE_90)
+		return false;
+
+	if (MSM_FORMAT_IS_YUV(fmt))
+		return false;
+
+	if (MSM_FORMAT_IS_UBWC(fmt) &&
+	    drm_rect_width(&pipe_cfg->src_rect) > max_linewidth / 2)
+		return false;
+
+	if (!test_bit(DPU_SSPP_SMART_DMA_V1, &sspp->cap->features) &&
+	    !test_bit(DPU_SSPP_SMART_DMA_V2, &sspp->cap->features))
+		return false;
+
+	return true;
+}
+
 static int dpu_plane_atomic_check_sspp(struct drm_plane *plane,
 				       struct drm_atomic_state *state,
 				       const struct drm_crtc_state *crtc_state)
@@ -901,7 +926,6 @@ static int dpu_plane_atomic_check_sspp(struct drm_plane *plane,
 	const struct msm_format *fmt;
 	struct dpu_sw_pipe_cfg *pipe_cfg = &pstate->pipe_cfg;
 	struct dpu_sw_pipe_cfg *r_pipe_cfg = &pstate->r_pipe_cfg;
-	uint32_t max_linewidth;
 	uint32_t supported_rotations;
 	const struct dpu_sspp_cfg *pipe_hw_caps;
 	const struct dpu_sspp_sub_blks *sblk;
@@ -923,8 +947,6 @@ static int dpu_plane_atomic_check_sspp(struct drm_plane *plane,
 
 	fmt = msm_framebuffer_format(new_plane_state->fb);
 
-	max_linewidth = pdpu->catalog->caps->max_linewidth;
-
 	supported_rotations = DRM_MODE_REFLECT_MASK | DRM_MODE_ROTATE_0;
 
 	if (pipe_hw_caps->features & BIT(DPU_SSPP_INLINE_ROTATION))
@@ -940,48 +962,43 @@ static int dpu_plane_atomic_check_sspp(struct drm_plane *plane,
 		return ret;
 
 	if (drm_rect_width(&r_pipe_cfg->src_rect) != 0) {
-		/*
-		 * In parallel multirect case only the half of the usual width
-		 * is supported for tiled formats. If we are here, we know that
-		 * full width is more than max_linewidth, thus each rect is
-		 * wider than allowed.
-		 */
-		if (MSM_FORMAT_IS_UBWC(fmt) &&
-		    drm_rect_width(&pipe_cfg->src_rect) > max_linewidth) {
-			DPU_DEBUG_PLANE(pdpu, "invalid src " DRM_RECT_FMT " line:%u, tiled format\n",
-					DRM_RECT_ARG(&pipe_cfg->src_rect), max_linewidth);
-			return -E2BIG;
-		}
+		ret = dpu_plane_atomic_check_pipe(pdpu, r_pipe, r_pipe_cfg, fmt,
+						  &crtc_state->adjusted_mode);
+		if (ret)
+			return ret;
+	}
 
-		if (drm_rect_width(&pipe_cfg->src_rect) != drm_rect_width(&pipe_cfg->dst_rect) ||
-		    drm_rect_height(&pipe_cfg->src_rect) != drm_rect_height(&pipe_cfg->dst_rect) ||
-		    (!test_bit(DPU_SSPP_SMART_DMA_V1, &pipe->sspp->cap->features) &&
-		     !test_bit(DPU_SSPP_SMART_DMA_V2, &pipe->sspp->cap->features)) ||
-		    pipe_cfg->rotation & DRM_MODE_ROTATE_90 ||
-		    MSM_FORMAT_IS_YUV(fmt)) {
-			DPU_DEBUG_PLANE(pdpu, "invalid src " DRM_RECT_FMT " line:%u, can't use split source\n",
-					DRM_RECT_ARG(&pipe_cfg->src_rect), max_linewidth);
-			return -E2BIG;
-		}
+	return 0;
+}
+
+static bool dpu_plane_try_multirect_parallel(struct dpu_sw_pipe *pipe, struct dpu_sw_pipe_cfg *pipe_cfg,
+					     struct dpu_sw_pipe *r_pipe, struct dpu_sw_pipe_cfg *r_pipe_cfg,
+					     struct dpu_hw_sspp *sspp, const struct msm_format *fmt,
+					     uint32_t max_linewidth)
+{
+	r_pipe->sspp = NULL;
+
+	pipe->multirect_index = DPU_SSPP_RECT_SOLO;
+	pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE;
+
+	r_pipe->multirect_index = DPU_SSPP_RECT_SOLO;
+	r_pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE;
+
+	if (drm_rect_width(&r_pipe_cfg->src_rect) != 0) {
+		if (!dpu_plane_is_multirect_parallel_capable(pipe->sspp, pipe_cfg, fmt, max_linewidth) ||
+		    !dpu_plane_is_multirect_parallel_capable(pipe->sspp, r_pipe_cfg, fmt, max_linewidth))
+			return false;
+
+		r_pipe->sspp = pipe->sspp;
 
-		/*
-		 * Use multirect for wide plane. We do not support dynamic
-		 * assignment of SSPPs, so we know the configuration.
-		 */
 		pipe->multirect_index = DPU_SSPP_RECT_0;
 		pipe->multirect_mode = DPU_SSPP_MULTIRECT_PARALLEL;
 
-		r_pipe->sspp = pipe->sspp;
 		r_pipe->multirect_index = DPU_SSPP_RECT_1;
 		r_pipe->multirect_mode = DPU_SSPP_MULTIRECT_PARALLEL;
-
-		ret = dpu_plane_atomic_check_pipe(pdpu, r_pipe, r_pipe_cfg, fmt,
-						  &crtc_state->adjusted_mode);
-		if (ret)
-			return ret;
 	}
 
-	return 0;
+	return true;
 }
 
 static int dpu_plane_atomic_check(struct drm_plane *plane,
@@ -995,16 +1012,16 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
 	struct dpu_kms *dpu_kms = _dpu_plane_get_kms(plane);
 	struct dpu_sw_pipe *pipe = &pstate->pipe;
 	struct dpu_sw_pipe *r_pipe = &pstate->r_pipe;
+	struct dpu_sw_pipe_cfg *pipe_cfg = &pstate->pipe_cfg;
+	struct dpu_sw_pipe_cfg *r_pipe_cfg = &pstate->r_pipe_cfg;
 	const struct drm_crtc_state *crtc_state = NULL;
+	uint32_t max_linewidth = dpu_kms->catalog->caps->max_linewidth;
 
 	if (new_plane_state->crtc)
 		crtc_state = drm_atomic_get_new_crtc_state(state,
 							   new_plane_state->crtc);
 
-	if (pdpu->pipe != SSPP_NONE) {
-		pipe->sspp = dpu_rm_get_sspp(&dpu_kms->rm, pdpu->pipe);
-		r_pipe->sspp = NULL;
-	}
+	pipe->sspp = dpu_rm_get_sspp(&dpu_kms->rm, pdpu->pipe);
 
 	if (!pipe->sspp)
 		return -EINVAL;
@@ -1016,10 +1033,17 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
 	if (!new_plane_state->visible)
 		return 0;
 
-	pipe->multirect_index = DPU_SSPP_RECT_SOLO;
-	pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE;
-	r_pipe->multirect_index = DPU_SSPP_RECT_SOLO;
-	r_pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE;
+	if (!dpu_plane_try_multirect_parallel(pipe, pipe_cfg, r_pipe, r_pipe_cfg,
+					      pipe->sspp,
+					      msm_framebuffer_format(new_plane_state->fb),
+					      max_linewidth)) {
+		DPU_DEBUG_PLANE(pdpu, "invalid " DRM_RECT_FMT " /" DRM_RECT_FMT
+				" max_line:%u, can't use split source\n",
+				DRM_RECT_ARG(&pipe_cfg->src_rect),
+				DRM_RECT_ARG(&r_pipe_cfg->src_rect),
+				max_linewidth);
+		return -E2BIG;
+	}
 
 	return dpu_plane_atomic_check_sspp(plane, state, crtc_state);
 }
@@ -1054,8 +1078,16 @@ static int dpu_plane_virtual_atomic_check(struct drm_plane *plane,
 		return 0;
 	}
 
-	/* force resource reallocation if the format of FB has changed */
+	/*
+	 * Force resource reallocation if the format of FB or src/dst have
+	 * changed. We might need to allocate different SSPP or SSPPs for this
+	 * plane than the one used previously.
+	 */
 	if (!old_plane_state || !old_plane_state->fb ||
+	    old_plane_state->src_w != plane_state->src_w ||
+	    old_plane_state->src_h != plane_state->src_h ||
+	    old_plane_state->src_w != plane_state->src_w ||
+	    old_plane_state->crtc_h != plane_state->crtc_h ||
 	    msm_framebuffer_format(old_plane_state->fb) !=
 	    msm_framebuffer_format(plane_state->fb))
 		crtc_state->planes_changed = true;
@@ -1075,6 +1107,8 @@ static int dpu_plane_virtual_assign_resources(struct drm_crtc *crtc,
 	struct dpu_plane_state *pstate;
 	struct dpu_sw_pipe *pipe;
 	struct dpu_sw_pipe *r_pipe;
+	struct dpu_sw_pipe_cfg *pipe_cfg;
+	struct dpu_sw_pipe_cfg *r_pipe_cfg;
 	const struct msm_format *fmt;
 
 	if (plane_state->crtc)
@@ -1084,6 +1118,8 @@ static int dpu_plane_virtual_assign_resources(struct drm_crtc *crtc,
 	pstate = to_dpu_plane_state(plane_state);
 	pipe = &pstate->pipe;
 	r_pipe = &pstate->r_pipe;
+	pipe_cfg = &pstate->pipe_cfg;
+	r_pipe_cfg = &pstate->r_pipe_cfg;
 
 	pipe->sspp = NULL;
 	r_pipe->sspp = NULL;
@@ -1102,6 +1138,22 @@ static int dpu_plane_virtual_assign_resources(struct drm_crtc *crtc,
 	if (!pipe->sspp)
 		return -ENODEV;
 
+	if (!dpu_plane_try_multirect_parallel(pipe, pipe_cfg, r_pipe, r_pipe_cfg,
+					      pipe->sspp,
+					      msm_framebuffer_format(plane_state->fb),
+					      dpu_kms->catalog->caps->max_linewidth)) {
+		/* multirect is not possible, use two SSPP blocks */
+		r_pipe->sspp = dpu_rm_reserve_sspp(&dpu_kms->rm, global_state, crtc, &reqs);
+		if (!r_pipe->sspp)
+			return -ENODEV;
+
+		pipe->multirect_index = DPU_SSPP_RECT_SOLO;
+		pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE;
+
+		r_pipe->multirect_index = DPU_SSPP_RECT_SOLO;
+		r_pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE;
+	}
+
 	return dpu_plane_atomic_check_sspp(plane, state, crtc_state);
 }
 

-- 
2.39.5





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux