On 11/28/2024 9:12 PM, Dmitry Baryshkov wrote: > On Thu, Nov 28, 2024 at 04:44:44PM +0800, Jingyi Wang wrote: >> Enable clock controller, interconnect and pinctrl for Qualcomm >> QCS8300 platform to boot to UART console. > > ... which is used on the ABC DEF board. The defconfig is being enabled > for everybody, so at least let them know which board increases the size > of the default kernel build. > will add that >> >> The serial engine depends on gcc, interconnect and pinctrl. Since >> the serial console driver is only available as built-in, so these >> configs needs be built-in for the UART device to probe and register >> the console. >> >> Reviewed-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx> >> Signed-off-by: Jingyi Wang <quic_jingyw@xxxxxxxxxxx> >> --- >> arch/arm64/configs/defconfig | 3 +++ >> 1 file changed, 3 insertions(+) >> >> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig >> index d13218d0c30f..3d9e48940c96 100644 >> --- a/arch/arm64/configs/defconfig >> +++ b/arch/arm64/configs/defconfig >> @@ -608,6 +608,7 @@ CONFIG_PINCTRL_MSM8996=y >> CONFIG_PINCTRL_MSM8998=y >> CONFIG_PINCTRL_QCM2290=y >> CONFIG_PINCTRL_QCS404=y >> +CONFIG_PINCTRL_QCS8300=y >> CONFIG_PINCTRL_QDF2XXX=y >> CONFIG_PINCTRL_QDU1000=y >> CONFIG_PINCTRL_SA8775P=y >> @@ -1327,6 +1328,7 @@ CONFIG_MSM_MMCC_8998=m >> CONFIG_QCM_GCC_2290=y >> CONFIG_QCM_DISPCC_2290=m >> CONFIG_QCS_GCC_404=y >> +CONFIG_QCS_GCC_8300=y >> CONFIG_SC_CAMCC_7280=m >> CONFIG_QDU_GCC_1000=y >> CONFIG_SC_CAMCC_8280XP=m >> @@ -1634,6 +1636,7 @@ CONFIG_INTERCONNECT_QCOM_MSM8996=y >> CONFIG_INTERCONNECT_QCOM_OSM_L3=m >> CONFIG_INTERCONNECT_QCOM_QCM2290=y >> CONFIG_INTERCONNECT_QCOM_QCS404=m >> +CONFIG_INTERCONNECT_QCOM_QCS8300=y >> CONFIG_INTERCONNECT_QCOM_QDU1000=y >> CONFIG_INTERCONNECT_QCOM_SA8775P=y >> CONFIG_INTERCONNECT_QCOM_SC7180=y >> >> -- >> 2.25.1 >> > Thanks, Jingyi
