On Thu, Nov 07, 2024 at 11:58:09AM +0000, Manivannan Sadhasivam via B4 Relay wrote:
> From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
>
> Starting from SM8550, UFS PHY GDSCs doesn't support hardware retention. So
> using RETAIN_FF_ENABLE is wrong. Moreover, without ALWAYS_ON flag, GDSCs
> will get powered down during suspend, causing the UFS PHY to loose its
> state. And this will lead to below UFS error during resume as observed on
> SM8550-QRD:
>
Unless I'm mistaken, ALWAYS_ON makes GDSC keep the gendpd ALWAYS_ON as
well, which in turn would ensure that any parent power-domain is kept
active - which in the case of GCC would imply CX.
The way we've dealt with this elsewhere is to use the PWRSTS_RET_ON flag
in pwrsts; we then keep the GDSC active, but release any votes to the
parent and rely on hardware to kick in MX when we're shutting down CX.
Perhaps this can't be done for some reason?
PS. In contrast to other platforms where we've dealt with issues of
under voltage crashes, I see &gcc in sm8550.dtsi doesn't specify a
parent power-domain, which would mean that the required-opps = <&nom> of
&ufs_mem_hc is voting for nothing.
Regards,
Bjorn
> ufshcd-qcom 1d84000.ufs: ufshcd_uic_hibern8_exit: hibern8 exit failed. ret = 5
> ufshcd-qcom 1d84000.ufs: __ufshcd_wl_resume: hibern8 exit failed 5
> ufs_device_wlun 0:0:0:49488: ufshcd_wl_resume failed: 5
> ufs_device_wlun 0:0:0:49488: PM: dpm_run_callback(): scsi_bus_resume+0x0/0x84 returns 5
> ufs_device_wlun 0:0:0:49488: PM: failed to resume async: error 5
>
> Cc: stable@xxxxxxxxxxxxxxx # 6.8
> Fixes: 1fe8273c8d40 ("clk: qcom: gcc-sm8550: Add the missing RETAIN_FF_ENABLE GDSC flag")
> Reported-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
> Suggested-by: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> ---
> drivers/clk/qcom/gcc-sm8550.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/clk/qcom/gcc-sm8550.c b/drivers/clk/qcom/gcc-sm8550.c
> index 5abaeddd6afc..7dd08e175820 100644
> --- a/drivers/clk/qcom/gcc-sm8550.c
> +++ b/drivers/clk/qcom/gcc-sm8550.c
> @@ -3046,7 +3046,7 @@ static struct gdsc ufs_phy_gdsc = {
> .name = "ufs_phy_gdsc",
> },
> .pwrsts = PWRSTS_OFF_ON,
> - .flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE,
> + .flags = POLL_CFG_GDSCR | ALWAYS_ON,
> };
>
> static struct gdsc ufs_mem_phy_gdsc = {
> @@ -3055,7 +3055,7 @@ static struct gdsc ufs_mem_phy_gdsc = {
> .name = "ufs_mem_phy_gdsc",
> },
> .pwrsts = PWRSTS_OFF_ON,
> - .flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE,
> + .flags = POLL_CFG_GDSCR | ALWAYS_ON,
> };
>
> static struct gdsc usb30_prim_gdsc = {
>
> --
> 2.25.1
>
>
