On Fri, Nov 22, 2024 at 02:29:31PM +0530, Md Sadre Alam wrote:
> Currently we are configuring lower 24 bits of address in descriptor
> whereas QPIC design expects 18 bit register offset from QPIC base
> address to be configured in cmd descriptors. This is leading to a
> different address actually being used in HW, leading to wrong value
> read.
>
> the actual issue is that the NANDc base address is different from the
> QPIC base address. But the driver doesn't take it into account and just
> used the QPIC base as the NANDc base. This used to work as the NANDc IP
> only considers the lower 18 bits of the address passed by the driver to
> derive the register offset. Since the base address of QPIC used to contain
> all 0 for lower 18 bits (like 0x07980000), the driver ended up passing the
SDX55's NANDc base is 0x01b30000 and it has bits 17 and 18 set corresponding to
0x30000. So it is correct that the IP only considers lower 18 bits and it used
to work as the driver ended up passing 0x3000 + register offset.
Your wording is not correct.
> actual register offset in it and NANDc worked properly. But on newer SoCs
> like SDX75, the QPIC base address doesn't contain all 0 for lower 18 bits
> (like 0x01C98000). So NANDc sees wrong offset as per the current logic
>
'all 0 for lower 18 bits' is not true.
> Older targets also used same configuration (lower 24 bits) like SDX55,
> SDX65, IPQ8074, IPQ6018 etc. but issue is masked in older targets due
> to lower 18 bits of QPIC base address being zero leading to expected
> address generation.
>
This paragraph is redundant now.
> The address should be passed to BAM 0x30000 + offset. In older targets
> the lower 18-bits are zero so that correct address being paased. But
> in newer targets the lower 18-bits are non-zero in QPIC base so that
> 0x300000 + offset giving the wrong value.
>
> SDX75 : QPIC_QPIC | 0x01C98000 (Lower 18 bits are non zero)
> SDX55 : QPIC_QPIC | 0x07980000 (Lower 18 bits are zero) Same for
This address is wrong as I mentioned above.
> older targets.
>
> Cc: stable@xxxxxxxxxxxxxxx
> Fixes: 8d6b6d7e135e ("mtd: nand: qcom: support for command descriptor formation")
> Signed-off-by: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
> ---
>
> Change in [v2]
>
> * Updated commit message
>
> * Added Fixes tag
>
> * Added stable kernel tag
>
> * Renamed the variable from offset_from_qpic to nandc_offset
>
> Change in [v1]
>
> * Preliminary correction for the register address forwarded to BAM
>
> drivers/mtd/nand/raw/qcom_nandc.c | 9 +++++++--
> 1 file changed, 7 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
> index b8cff9240b28..cc59461df72e 100644
> --- a/drivers/mtd/nand/raw/qcom_nandc.c
> +++ b/drivers/mtd/nand/raw/qcom_nandc.c
> @@ -207,7 +207,7 @@ nandc_set_reg(chip, reg, \
> #define dev_cmd_reg_addr(nandc, reg) ((nandc)->props->dev_cmd_reg_start + (reg))
>
> /* Returns the NAND register physical address */
> -#define nandc_reg_phys(chip, offset) ((chip)->base_phys + (offset))
> +#define nandc_reg_phys(chip, offset) ((nandc)->props->nandc_offset + (offset))
>
> /* Returns the dma address for reg read buffer */
> #define reg_buf_dma_addr(chip, vaddr) \
> @@ -561,6 +561,7 @@ struct qcom_nandc_props {
> bool is_qpic;
> bool qpic_v2;
> bool use_codeword_fixup;
> + u32 nandc_offset;
> };
>
> /* Frees the BAM transaction memory */
> @@ -3477,6 +3478,7 @@ static const struct qcom_nandc_props ipq806x_nandc_props = {
> .is_bam = false,
> .use_codeword_fixup = true,
> .dev_cmd_reg_start = 0x0,
> + .nandc_offset = 0x30000,
> };
>
> static const struct qcom_nandc_props ipq4019_nandc_props = {
> @@ -3484,6 +3486,7 @@ static const struct qcom_nandc_props ipq4019_nandc_props = {
> .is_bam = true,
> .is_qpic = true,
> .dev_cmd_reg_start = 0x0,
> + .nandc_offset = 0x30000,
> };
>
> static const struct qcom_nandc_props ipq8074_nandc_props = {
> @@ -3491,6 +3494,7 @@ static const struct qcom_nandc_props ipq8074_nandc_props = {
> .is_bam = true,
> .is_qpic = true,
> .dev_cmd_reg_start = 0x7000,
> + .nandc_offset = 0x30000,
> };
>
> static const struct qcom_nandc_props sdx55_nandc_props = {
> @@ -3498,7 +3502,8 @@ static const struct qcom_nandc_props sdx55_nandc_props = {
> .is_bam = true,
> .is_qpic = true,
> .qpic_v2 = true,
> - .dev_cmd_reg_start = 0x7000,
> + .dev_cmd_reg_start = 0x0,
What is this change?
- Mani
--
மணிவண்ணன் சதாசிவம்
