Right now we support one power-domain per which power clock controller.
These single power-domains are switched on by the driver platform logic.
However when we have multiple power-domains attached to a clock-controller
that list of power-domains must be handled outside of driver platform
logic.
Use devm_pm_domain_attach_list() to automatically hook the list of given
power-domains in the dtsi for the clock-controller driver.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
---
drivers/clk/qcom/common.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/drivers/clk/qcom/common.c b/drivers/clk/qcom/common.c
index 33cc1f73c69d1f875a193aea0552902268dc8716..7727295c57c8f6672d46d2380e1ff5ec2ac68d42 100644
--- a/drivers/clk/qcom/common.c
+++ b/drivers/clk/qcom/common.c
@@ -22,6 +22,7 @@ struct qcom_cc {
struct qcom_reset_controller reset;
struct clk_regmap **rclks;
size_t num_rclks;
+ struct dev_pm_domain_list *pd_list;
};
const
@@ -283,6 +284,21 @@ static int qcom_cc_icc_register(struct device *dev,
desc->num_icc_hws, icd);
}
+static int qcom_cc_pds_attach(struct device *dev, struct qcom_cc *cc)
+{
+ struct dev_pm_domain_attach_data pd_data = {
+ .pd_names = 0,
+ .num_pd_names = 0,
+ };
+ int ret;
+
+ ret = devm_pm_domain_attach_list(dev, &pd_data, &cc->pd_list);
+ if (ret < 0 && ret != -EEXIST)
+ return ret;
+
+ return 0;
+}
+
int qcom_cc_really_probe(struct device *dev,
const struct qcom_cc_desc *desc, struct regmap *regmap)
{
@@ -299,6 +315,10 @@ int qcom_cc_really_probe(struct device *dev,
if (!cc)
return -ENOMEM;
+ ret = qcom_cc_pds_attach(dev, cc);
+ if (ret)
+ return ret;
+
reset = &cc->reset;
reset->rcdev.of_node = dev->of_node;
reset->rcdev.ops = &qcom_reset_ops;
--
2.45.2
