On Mon, Nov 18, 2024 at 02:24:32AM +0000, Bryan O'Donoghue wrote:
> Right now we have a plethora of singleton power-domains which power clock
> controllers. These singletons are switched on by core logic when we probe
> the clocks.
>
> However when multiple power-domains are attached to a clock controller that
> list of power-domains needs to be managed outside of core logic.
>
> Use dev_pm_domain_attach_list() to automatically hook the list of given
> power-domains in the dtsi for the clock being registered in
> qcom_cc_really_probe().
>
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
> ---
> drivers/clk/qcom/common.c | 24 ++++++++++++++++++++++++
> 1 file changed, 24 insertions(+)
>
> diff --git a/drivers/clk/qcom/common.c b/drivers/clk/qcom/common.c
> index 33cc1f73c69d1f875a193aea0552902268dc8716..b4377fa09f7c0ec8d3c63dfc97d04fbb8cd6e10b 100644
> --- a/drivers/clk/qcom/common.c
> +++ b/drivers/clk/qcom/common.c
> @@ -22,6 +22,7 @@ struct qcom_cc {
> struct qcom_reset_controller reset;
> struct clk_regmap **rclks;
> size_t num_rclks;
> + struct dev_pm_domain_list *pd_list;
> };
>
> const
> @@ -283,6 +284,25 @@ static int qcom_cc_icc_register(struct device *dev,
> desc->num_icc_hws, icd);
> }
>
> +static int qcom_cc_pds_attach(struct device *dev, struct qcom_cc *cc)
> +{
> + struct dev_pm_domain_attach_data pd_data = {
> + .pd_names = 0,
> + .num_pd_names = 0,
> + };
> + int ret;
> +
> + /* Only one power-domain platform framework will hook it up */
> + if (dev->pm_domain)
> + return 0;
> +
> + ret = dev_pm_domain_attach_list(dev, &pd_data, &cc->pd_list);
> + if (ret < 0)
> + return ret;
I don't think it is enough to just attach to power domains. We also need
to power on some of them (MMCX) in order to be able to access clock
controller registers.
> +
> + return 0;
> +}
> +
> int qcom_cc_really_probe(struct device *dev,
> const struct qcom_cc_desc *desc, struct regmap *regmap)
> {
> @@ -299,6 +319,10 @@ int qcom_cc_really_probe(struct device *dev,
> if (!cc)
> return -ENOMEM;
>
> + ret = qcom_cc_pds_attach(dev, cc);
> + if (ret)
> + return ret;
> +
> reset = &cc->reset;
> reset->rcdev.of_node = dev->of_node;
> reset->rcdev.ops = &qcom_reset_ops;
>
> --
> 2.45.2
>
--
With best wishes
Dmitry
