From: Yijie Yang <quic_yijiyang@xxxxxxxxxxx> Add dts nodes to enable ethernet interface on qcs8300-ride and Rev 2 platforms. The EMAC, SerDes and EPHY version are the same as those in sa8775p. To: Bjorn Andersson <andersson@xxxxxxxxxx> To: Konrad Dybcio <konradybcio@xxxxxxxxxx> To: Rob Herring <robh@xxxxxxxxxx> To: Krzysztof Kozlowski <krzk+dt@xxxxxxxxxx> To: Conor Dooley <conor+dt@xxxxxxxxxx> To: Richard Cochran <richardcochran@xxxxxxxxx> Cc: linux-arm-msm@xxxxxxxxxxxxxxx Cc: devicetree@xxxxxxxxxxxxxxx Cc: linux-kernel@xxxxxxxxxxxxxxx Cc: netdev@xxxxxxxxxxxxxxx Cc: Yijie Yang <quic_yijiyang@xxxxxxxxxxx> Signed-off-by: Yijie Yang <quic_yijiyang@xxxxxxxxxxx> --- This patch series depends on below patch series: https://lore.kernel.org/all/20240925-qcs8300_initial_dtsi-v2-0-494c40fa2a42@xxxxxxxxxxx/ https://lore.kernel.org/all/20241010-schema-v1-0-98b2d0a2f7a2@xxxxxxxxxxx/ Changes in v3: - Remove unnecessary space and line in qcs8300-ride.dtsi. - Link to v2: https://lore.kernel.org/all/20241017102728.2844274-1-quic_yijiyang@xxxxxxxxxxx/ Yijie Yang (5): dt-bindings: arm: qcom: add qcs8300-ride Rev 2 arm64: dts: qcom: qcs8300: add the first 1Gb ethernet arm64: dts: qcom: qcs8300-ride: enable ethernet0 arm64: dts: qcom: move common parts for qcs8300-ride variants into a .dtsi arm64: dts: qcom: qcs8300-ride-r2: add new board file .../devicetree/bindings/arm/qcom.yaml | 1 + arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/qcs8300-ride-r2.dts | 33 ++ arch/arm64/boot/dts/qcom/qcs8300-ride.dts | 299 ++---------------- .../{qcs8300-ride.dts => qcs8300-ride.dtsi} | 107 ++++++- arch/arm64/boot/dts/qcom/qcs8300.dtsi | 43 +++ 6 files changed, 211 insertions(+), 273 deletions(-) create mode 100644 arch/arm64/boot/dts/qcom/qcs8300-ride-r2.dts rewrite arch/arm64/boot/dts/qcom/qcs8300-ride.dts (95%) copy arch/arm64/boot/dts/qcom/{qcs8300-ride.dts => qcs8300-ride.dtsi} (78%) base-commit: 4d0326b60bb753627437fff0f76bf1525bcda422 -- 2.34.1
