Add the PMI8950 LAB-IBB regulator nodes, with the
PMI8998 compatible as fallback.
The LAB-IBB regulators are used as panels supplies
on existing phones or tablets.
Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/pmi8950.dtsi | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/pmi8950.dtsi b/arch/arm64/boot/dts/qcom/pmi8950.dtsi
index 4aff437263a2930489216c81c53e0d7ef7d14b35..3d3b1cd97cc3d04b2c5a78c06fbeb3fee3c5af8d 100644
--- a/arch/arm64/boot/dts/qcom/pmi8950.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi8950.dtsi
@@ -84,6 +84,23 @@ pmic@3 {
#address-cells = <1>;
#size-cells = <0>;
+ labibb {
+ compatible = "qcom,pmi8950-lab-ibb",
+ "qcom,pmi8998-lab-ibb";
+
+ ibb: ibb {
+ interrupts = <0x3 0xdc 0x2 IRQ_TYPE_EDGE_RISING>,
+ <0x3 0xdc 0x0 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "sc-err", "ocp";
+ };
+
+ lab: lab {
+ interrupts = <0x3 0xde 0x1 IRQ_TYPE_EDGE_RISING>,
+ <0x3 0xde 0x0 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "sc-err", "ocp";
+ };
+ };
+
pmi8950_pwm: pwm {
compatible = "qcom,pmi8950-pwm";
#pwm-cells = <2>;
--
2.34.1
