On Tue, Nov 12, 2024 at 08:31:33PM +0530, Krishna chaitanya chundru wrote: > Add binding describing the Qualcomm PCIe switch, QPS615, > which provides Ethernet MAC integrated to the 3rd downstream port > and two downstream PCIe ports. > Reviewed-by: Bjorn Andersson <andersson@xxxxxxxxxx> Regards, Bjorn > Signed-off-by: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx> > --- > .../devicetree/bindings/pci/qcom,qps615.yaml | 205 +++++++++++++++++++++ > 1 file changed, 205 insertions(+) > > diff --git a/Documentation/devicetree/bindings/pci/qcom,qps615.yaml b/Documentation/devicetree/bindings/pci/qcom,qps615.yaml > new file mode 100644 > index 000000000000..e6a63a0bb0f3 > --- /dev/null > +++ b/Documentation/devicetree/bindings/pci/qcom,qps615.yaml > @@ -0,0 +1,205 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/pci/qcom,qps615.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm QPS615 PCIe switch > + > +maintainers: > + - Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx> > + > +description: | > + Qualcomm QPS615 PCIe switch has one upstream and three downstream > + ports. The 3rd downstream port has integrated endpoint device of > + Ethernet MAC. Other two downstream ports are supposed to connect > + to external device. > + > + The QPS615 PCIe switch can be configured through I2C interface before > + PCIe link is established to change FTS, ASPM related entry delays, > + tx amplitude etc for better power efficiency and functionality. > + > +properties: > + compatible: > + enum: > + - pci1179,0623 > + > + reg: > + maxItems: 1 > + > + i2c-parent: > + $ref: /schemas/types.yaml#/definitions/phandle-array > + description: | > + A phandle to the parent I2C node and the slave address of the device > + used to do configure qps615 to change FTS, tx amplitude etc. > + items: > + - description: Phandle to the I2C controller node > + - description: I2C slave address > + > + vdd18-supply: true > + > + vdd09-supply: true > + > + vddc-supply: true > + > + vddio1-supply: true > + > + vddio2-supply: true > + > + vddio18-supply: true > + > + reset-gpios: > + maxItems: 1 > + description: > + GPIO controlling the RESX# pin. > + > + qps615,axi-clk-freq-hz: > + description: > + AXI clock rate which is internal bus of the switch > + The switch only runs in two frequencies i.e 250MHz and 125MHz. > + enum: [125000000, 250000000] > + > +allOf: > + - $ref: "#/$defs/qps615-node" > + > +patternProperties: > + "@1?[0-9a-f](,[0-7])?$": > + description: child nodes describing the internal downstream ports > + the qps615 switch. > + type: object > + $ref: "#/$defs/qps615-node" > + unevaluatedProperties: false > + > +$defs: > + qps615-node: > + type: object > + > + properties: > + qcom,l0s-entry-delay-ns: > + description: Aspm l0s entry delay. > + > + qcom,l1-entry-delay-ns: > + description: Aspm l1 entry delay. > + > + qcom,tx-amplitude-millivolt: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: Change Tx Margin setting for low power consumption. > + > + qcom,no-dfe-support: > + type: boolean > + description: Disable DFE (Decision Feedback Equalizer), which mitigates > + intersymbol interference and some reflections caused by impedance mismatches. > + > + qcom,nfts: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + Number of Fast Training Sequence (FTS) used during L0s to L0 exit > + for bit and Symbol lock. > + > + allOf: > + - $ref: /schemas/pci/pci-bus.yaml# > + > +unevaluatedProperties: false > + > +required: > + - vdd18-supply > + - vdd09-supply > + - vddc-supply > + - vddio1-supply > + - vddio2-supply > + - vddio18-supply > + - i2c-parent > + - reset-gpios > + > +examples: > + - | > + > + #include <dt-bindings/gpio/gpio.h> > + > + pcie { > + #address-cells = <3>; > + #size-cells = <2>; > + > + pcie@0 { > + device_type = "pci"; > + reg = <0x0 0x0 0x0 0x0 0x0>; > + > + #address-cells = <3>; > + #size-cells = <2>; > + ranges; > + bus-range = <0x01 0xff>; > + > + pcie@0,0 { > + compatible = "pci1179,0623"; > + reg = <0x10000 0x0 0x0 0x0 0x0>; > + device_type = "pci"; > + #address-cells = <3>; > + #size-cells = <2>; > + ranges; > + bus-range = <0x02 0xff>; > + > + i2c-parent = <&qup_i2c 0x77>; > + > + vdd18-supply = <&vdd>; > + vdd09-supply = <&vdd>; > + vddc-supply = <&vdd>; > + vddio1-supply = <&vdd>; > + vddio2-supply = <&vdd>; > + vddio18-supply = <&vdd>; > + > + reset-gpios = <&gpio 1 GPIO_ACTIVE_LOW>; > + > + pcie@1,0 { > + reg = <0x20800 0x0 0x0 0x0 0x0>; > + #address-cells = <3>; > + #size-cells = <2>; > + device_type = "pci"; > + ranges; > + bus-range = <0x03 0xff>; > + > + qcom,no-dfe-support; > + }; > + > + pcie@2,0 { > + reg = <0x21000 0x0 0x0 0x0 0x0>; > + #address-cells = <3>; > + #size-cells = <2>; > + device_type = "pci"; > + ranges; > + bus-range = <0x04 0xff>; > + > + qcom,nfts = <10>; > + }; > + > + pcie@3,0 { > + reg = <0x21800 0x0 0x0 0x0 0x0>; > + #address-cells = <3>; > + #size-cells = <2>; > + device_type = "pci"; > + ranges; > + bus-range = <0x05 0xff>; > + > + qcom,tx-amplitude-millivolt = <10>; > + pcie@0,0 { > + reg = <0x50000 0x0 0x0 0x0 0x0>; > + #address-cells = <3>; > + #size-cells = <2>; > + device_type = "pci"; > + ranges; > + > + qcom,l1-entry-delay-ns = <10>; > + }; > + > + pcie@0,1 { > + reg = <0x50100 0x0 0x0 0x0 0x0>; > + #address-cells = <3>; > + #size-cells = <2>; > + device_type = "pci"; > + ranges; > + > + qcom,l0s-entry-delay-ns = <10>; > + }; > + }; > + }; > + }; > + }; > > -- > 2.34.1 >
