On 4.11.2024 1:44 PM, Manikanta Mylavarapu wrote:
> From: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
>
> IPQ5332 has tsens v2.3.3 peripheral. This patch adds the tsense
> node with nvmem cells for calibration data.
>
> Signed-off-by: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
> Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
> ---
> Changes in V6:
> - No change
>
> arch/arm64/boot/dts/qcom/ipq5332.dtsi | 66 +++++++++++++++++++++++++++
> 1 file changed, 66 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
> index d3c3e215a15c..94dca05fdc2a 100644
> --- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
> @@ -177,6 +177,46 @@ cpu_speed_bin: cpu-speed-bin@1d {
> reg = <0x1d 0x2>;
> bits = <7 2>;
> };
> +
> + s11: s11@3a5 {
You're adding 's11' etc. to the global label namespace. Please make
the names more specific, like tsens_sens11_off
[...]
> + tsens: thermal-sensor@4a9000 {
> + compatible = "qcom,ipq5332-tsens";
> + reg = <0x4a9000 0x1000>,
> + <0x4a8000 0x1000>;
Please pad the address part to 8 hex digits with leading zeroes.
Konrad
