On 04/11/2024 15:42, Krzysztof Kozlowski wrote:
There is a mismatch between 'reg' property and unit address for last
there CDSP compute context banks. Current values were taken as-is from
downstream source. Considering that 'reg' is used by Linux driver as
SID of context bank and that least significant bytes of IOMMU value
match the 'reg', assume the unit-address is wrong and needs fixing.
This also won't have any practical impact, except adhering to Devicetree
spec.
Fixes: dae8cdb0a9e1 ("arm64: dts: qcom: sm8650: Add three missing fastrpc-compute-cb nodes")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8650.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi
index 3d8a807a81c9..367fdd090768 100644
--- a/arch/arm64/boot/dts/qcom/sm8650.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi
@@ -5622,7 +5622,7 @@ compute-cb@8 {
/* note: secure cb9 in downstream */
- compute-cb@10 {
+ compute-cb@12 {
compatible = "qcom,fastrpc-compute-cb";
reg = <12>;
@@ -5632,7 +5632,7 @@ compute-cb@10 {
dma-coherent;
};
- compute-cb@11 {
+ compute-cb@13 {
compatible = "qcom,fastrpc-compute-cb";
reg = <13>;
@@ -5642,7 +5642,7 @@ compute-cb@11 {
dma-coherent;
};
- compute-cb@12 {
+ compute-cb@14 {
compatible = "qcom,fastrpc-compute-cb";
reg = <14>;
Reviewed-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
