On 1.11.2024 5:29 PM, Abel Vesa wrote:
> The Parade PS8830 is a USB4, DisplayPort and Thunderbolt 4 retimer,
> controlled over I2C. It usually sits between a USB/DisplayPort PHY
> and the Type-C connector, and provides orientation and altmode handling.
>
> The boards that use this retimer are the ones featuring the Qualcomm
> Snapdragon X Elite SoCs.
>
> Add a driver with support for the following modes:
> - DisplayPort 4-lanes
> - DisplayPort 2-lanes + USB3
> - USB3
>
> There is another variant of this retimer which is called PS8833. It seems
> to be really similar to the PS8830, so future-proof this driver by
> naming it ps883x.
>
> Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
> ---
[...]
> +static void ps883x_configure(struct ps883x_retimer *retimer, int cfg0, int cfg1, int cfg2)
> +{
> + regmap_write(retimer->regmap, 0x0, cfg0);
> + regmap_write(retimer->regmap, 0x1, cfg1);
> + regmap_write(retimer->regmap, 0x2, cfg2);
> +}
Somewhere between introducing regcache and dropping it, you removed
muxing to a safe mode during _configure()
[...]
> + /* skip resetting if already configured */
> + if (regmap_test_bits(retimer->regmap, 0x00, BIT(0)))
> + return 0;
What is that register and what does BIT(0) mean?
Konrad
