Le 01/11/2024 à 17:29, Abel Vesa a écrit :
The Parade PS8830 is a USB4, DisplayPort and Thunderbolt 4 retimer,
controlled over I2C. It usually sits between a USB/DisplayPort PHY
and the Type-C connector, and provides orientation and altmode handling.
The boards that use this retimer are the ones featuring the Qualcomm
Snapdragon X Elite SoCs.
Add a driver with support for the following modes:
- DisplayPort 4-lanes
- DisplayPort 2-lanes + USB3
- USB3
There is another variant of this retimer which is called PS8833. It seems
to be really similar to the PS8830, so future-proof this driver by
naming it ps883x.
Signed-off-by: Abel Vesa <abel.vesa-QSEj5FYQhm4dnm+yROfE0A@xxxxxxxxxxxxxxxx>
---
Hi,
...
+static void ps883x_disable_vregs(struct ps883x_retimer *retimer)
+{
+ regulator_disable(retimer->vddio_supply);
+ regulator_disable(retimer->vddat_supply);
+ regulator_disable(retimer->vddar_supply);
+ regulator_disable(retimer->vdd_supply);
+ regulator_disable(retimer->vdd33_cap_supply);
+ regulator_disable(retimer->vdd33_supply);
+}
+
+static int ps883x_get_vregs(struct ps883x_retimer *retimer)
This could maybe be replaced by a
devm_regulator_bulk_get() call?
(and use the bulk API in other places)
+{
+ struct device *dev = &retimer->client->dev;
+
+ retimer->vdd_supply = devm_regulator_get(dev, "vdd");
+ if (IS_ERR(retimer->vdd_supply))
+ return dev_err_probe(dev, PTR_ERR(retimer->vdd_supply),
+ "failed to get VDD\n");
+
+ retimer->vdd33_supply = devm_regulator_get(dev, "vdd33");
+ if (IS_ERR(retimer->vdd33_supply))
+ return dev_err_probe(dev, PTR_ERR(retimer->vdd33_supply),
+ "failed to get VDD 3.3V\n");
+
+ retimer->vdd33_cap_supply = devm_regulator_get(dev, "vdd33-cap");
+ if (IS_ERR(retimer->vdd33_cap_supply))
+ return dev_err_probe(dev, PTR_ERR(retimer->vdd33_cap_supply),
+ "failed to get VDD CAP 3.3V\n");
+
+ retimer->vddat_supply = devm_regulator_get(dev, "vddat");
+ if (IS_ERR(retimer->vddat_supply))
+ return dev_err_probe(dev, PTR_ERR(retimer->vddat_supply),
+ "failed to get VDD AT\n");
+
+ retimer->vddar_supply = devm_regulator_get(dev, "vddar");
+ if (IS_ERR(retimer->vddar_supply))
+ return dev_err_probe(dev, PTR_ERR(retimer->vddar_supply),
+ "failed to get VDD AR\n");
+
+ retimer->vddio_supply = devm_regulator_get(dev, "vddio");
+ if (IS_ERR(retimer->vddio_supply))
+ return dev_err_probe(dev, PTR_ERR(retimer->vddio_supply),
+ "failed to get VDD IO\n");
+
+ return 0;
+}
...
+static int ps883x_retimer_probe(struct i2c_client *client)
+{
+ struct device *dev = &client->dev;
+ struct typec_switch_desc sw_desc = { };
+ struct typec_retimer_desc rtmr_desc = { };
+ struct ps883x_retimer *retimer;
+ int ret;
+
+ retimer = devm_kzalloc(dev, sizeof(*retimer), GFP_KERNEL);
+ if (!retimer)
+ return -ENOMEM;
+
+ retimer->client = client;
+
+ mutex_init(&retimer->lock);
+
+ retimer->regmap = devm_regmap_init_i2c(client, &ps883x_retimer_regmap);
+ if (IS_ERR(retimer->regmap)) {
+ ret = PTR_ERR(retimer->regmap);
+ dev_err(dev, "failed to allocate register map: %d\n", ret);
Maybe dev_err_probe() as below?
+ return ret;
+ }
+
+ ret = ps883x_get_vregs(retimer);
+ if (ret)
+ return ret;
+
+ retimer->xo_clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(retimer->xo_clk))
+ return dev_err_probe(dev, PTR_ERR(retimer->xo_clk),
+ "failed to get xo clock\n");
+
+ retimer->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_ASIS);
+ if (IS_ERR(retimer->reset_gpio))
+ return dev_err_probe(dev, PTR_ERR(retimer->reset_gpio),
+ "failed to get reset gpio\n");
+
+ retimer->typec_switch = typec_switch_get(dev);
+ if (IS_ERR(retimer->typec_switch))
+ return dev_err_probe(dev, PTR_ERR(retimer->typec_switch),
+ "failed to acquire orientation-switch\n");
+
+ retimer->typec_mux = typec_mux_get(dev);
+ if (IS_ERR(retimer->typec_mux)) {
+ ret = dev_err_probe(dev, PTR_ERR(retimer->typec_mux),
+ "failed to acquire mode-mux\n");
+ goto err_switch_put;
+ }
+
+ ret = drm_aux_bridge_register(dev);
+ if (ret)
+ goto err_mux_put;
+
+ ret = clk_prepare_enable(retimer->xo_clk);
+ if (ret) {
+ dev_err(dev, "failed to enable XO: %d\n", ret);
+ goto err_mux_put;
+ }
+
+ ret = ps883x_enable_vregs(retimer);
+ if (ret)
+ goto err_clk_disable;
+
+ sw_desc.drvdata = retimer;
+ sw_desc.fwnode = dev_fwnode(dev);
+ sw_desc.set = ps883x_sw_set;
+
+ retimer->sw = typec_switch_register(dev, &sw_desc);
+ if (IS_ERR(retimer->sw)) {
+ ret = PTR_ERR(retimer->sw);
+ dev_err(dev, "failed to register typec switch: %d\n", ret);
Maybe dev_err_probe() as above?
+ goto err_vregs_disable;
+ }
+
+ rtmr_desc.drvdata = retimer;
+ rtmr_desc.fwnode = dev_fwnode(dev);
+ rtmr_desc.set = ps883x_retimer_set;
+
+ retimer->retimer = typec_retimer_register(dev, &rtmr_desc);
+ if (IS_ERR(retimer->retimer)) {
+ ret = PTR_ERR(retimer->retimer);
+ dev_err(dev, "failed to register typec retimer: %d\n", ret);
Maybe dev_err_probe() as above?
+ goto err_switch_unregister;
+ }
+
+ /* skip resetting if already configured */
+ if (regmap_test_bits(retimer->regmap, 0x00, BIT(0)))
+ return 0;
+
+ gpiod_direction_output(retimer->reset_gpio, 1);
+
+ /* VDD IO supply enable to reset release delay */
+ usleep_range(4000, 14000);
+
+ gpiod_set_value(retimer->reset_gpio, 0);
+
+ /* firmware initialization delay */
+ msleep(60);
+
+ return 0;
+
+err_switch_unregister:
+ typec_switch_unregister(retimer->sw);
+err_vregs_disable:
+ ps883x_disable_vregs(retimer);
+err_clk_disable:
+ clk_disable_unprepare(retimer->xo_clk);
+err_mux_put:
+ typec_mux_put(retimer->typec_mux);
+err_switch_put:
+ typec_switch_put(retimer->typec_switch);
+
+ return ret;
+}
+
+static void ps883x_retimer_remove(struct i2c_client *client)
+{
+ struct ps883x_retimer *retimer = i2c_get_clientdata(client);
+
+ typec_retimer_unregister(retimer->retimer);
+ typec_switch_unregister(retimer->sw);
+
+ gpiod_set_value(retimer->reset_gpio, 1);
+
+ regulator_disable(retimer->vddio_supply);
+ regulator_disable(retimer->vddat_supply);
+ regulator_disable(retimer->vddar_supply);
+ regulator_disable(retimer->vdd_supply);
+ regulator_disable(retimer->vdd33_cap_supply);
+ regulator_disable(retimer->vdd33_supply);
ps883x_disable_vregs()?
+
+ clk_disable_unprepare(retimer->xo_clk);
+
+ typec_mux_put(retimer->typec_mux);
+ typec_switch_put(retimer->typec_switch);
+}
...
CJ
