[PATCH v2 2/5] clk: qcom: ipq4019: Added the apss cpu pll divider clock node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The current ipq4019 clock driver does not have support for all
the frequency supported by APPS CPU. APPS CPU frequency is
provided with APSS CPU PLL divider which divides down the VCO
frequency. This divider is nonlinear and specific to IPQ4019
so the standard divider code cannot be used for this.

This patch registers new clock node and adds its clock
operations for APPS CPU clock divider. Since, this divider
is nonlinear, so frequency table is also added for this,
which contains the frequency and its corresponding hardware
divider values.

Signed-off-by: Abhishek Sahu <absahu@xxxxxxxxxxxxxx>
---
 drivers/clk/qcom/gcc-ipq4019.c               | 112 ++++++++++++++++++++++++++-
 include/dt-bindings/clock/qcom,gcc-ipq4019.h |   1 +
 2 files changed, 112 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/qcom/gcc-ipq4019.c b/drivers/clk/qcom/gcc-ipq4019.c
index 17ca6d3..4c8a97f 100644
--- a/drivers/clk/qcom/gcc-ipq4019.c
+++ b/drivers/clk/qcom/gcc-ipq4019.c
@@ -154,7 +154,7 @@ static const char * const gcc_xo_ddr_500_200[] = {
 	"xo",
 	"gcc_fepll200_clk",
 	"gcc_fepll500_clk",
-	"ddrpllapss",
+	"gcc_apps_cpu_plldiv_clk",
 };
 
 #define F(f, s, h, m, n) { (f), (s), (2 * (h) - 1), (m), (n) }
@@ -571,6 +571,7 @@ static struct clk_rcg2 apps_clk_src = {
 		.parent_names = gcc_xo_ddr_500_200,
 		.num_parents = 4,
 		.ops = &clk_rcg2_ops,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -1273,6 +1274,114 @@ static struct clk_pll_vco gcc_fepll_vco = {
 	},
 };
 
+/*
+ * Round rate function for APPS CPU PLL Clock divider.
+ * It Returns the input rate without changing it. The hardware supported rate
+ * will be calculated in set function by getting the same from frequency table.
+ */
+static long clk_cpu_div_round_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long *p_rate)
+{
+	return rate;
+};
+
+/*
+ * Clock set rate function for APPS CPU PLL Clock divider.
+ * It looks up the frequency table and updates the PLL divider to corresponding
+ * divider value.
+ */
+static int clk_cpu_div_set_rate(struct clk_hw *hw, unsigned long rate,
+			      unsigned long parent_rate)
+{
+	struct clk_pll_div *rcg = to_clk_pll_div(hw);
+	const struct freq_tbl *f;
+	u32 mask;
+	int ret;
+
+	f = qcom_find_freq(rcg->freq_tbl, rate);
+	if (!f)
+		return -EINVAL;
+
+	mask = (BIT(rcg->cdiv.width) - 1) << rcg->cdiv.shift;
+	ret = regmap_update_bits(rcg->cdiv.clkr.regmap,
+				rcg->cdiv.reg, mask,
+				(f->pre_div << rcg->cdiv.shift) & mask);
+	udelay(1);
+
+	return 0;
+};
+
+/*
+ * Clock frequency calculation function for APPS CPU PLL Clock divider.
+ * This clock divider is nonlinear so this function calculates the actual
+ * divider and returns the output frequency by dividing VCO Frequency
+ * with this actual divider value.
+ */
+static unsigned long clk_cpu_div_recalc_rate(struct clk_hw *hw,
+					   unsigned long parent_rate)
+{
+	struct clk_pll_div *rcg = to_clk_pll_div(hw);
+	u32 cdiv, pre_div;
+
+	regmap_read(rcg->cdiv.clkr.regmap, rcg->cdiv.reg, &cdiv);
+	cdiv = (cdiv >> rcg->cdiv.shift) & (BIT(rcg->cdiv.width) - 1);
+
+	/*
+	 * Some dividers have value in 0.5 fraction so multiply both VCO
+	 * frequency(parent_rate) and pre_div with 2 to make integer
+	 * calculation.
+	 */
+	if (cdiv > 10)
+		pre_div = (cdiv + 1) * 2;
+	else
+		pre_div = cdiv + 12;
+
+	return clk_calc_divider_rate(parent_rate * 2, pre_div);
+};
+
+const struct clk_ops clk_regmap_cpu_div_ops = {
+	.round_rate = clk_cpu_div_round_rate,
+	.set_rate = clk_cpu_div_set_rate,
+	.recalc_rate = clk_cpu_div_recalc_rate,
+};
+
+static const struct freq_tbl ftbl_apps_ddr_pll[] = {
+	{380000000, P_XO, 0xD, 0},
+	{409000000, P_XO, 0xC, 0, 0},
+	{444000000, P_XO, 0xB, 0, 0},
+	{484000000, P_XO, 0xA, 0, 0},
+	{507000000, P_XO, 0x9, 0, 0},
+	{532000000, P_XO, 0x8, 0, 0},
+	{560000000, P_XO, 0x7, 0, 0},
+	{592000000, P_XO, 0x6, 0, 0},
+	{626000000, P_XO, 0x5, 0, 0},
+	{666000000, P_XO, 0x4, 0, 0},
+	{710000000, P_XO, 0x3, 0, 0},
+	{761000000, P_XO, 0x2, 0, 0},
+	{819000000, P_XO, 0x1, 0, 0},
+	{888000000, P_XO, 0x0, 0, 0},
+	{}
+};
+
+static struct clk_pll_div gcc_apps_cpu_plldiv_clk = {
+	.cdiv.reg = 0x2E020,
+	.cdiv.shift = 4,
+	.cdiv.width = 4,
+	.cdiv.clkr = {
+		.enable_reg = 0x2E000,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_apps_cpu_plldiv_clk",
+			.parent_names = (const char *[]){
+				"gcc_apps_ddrpll_vco",
+			},
+			.num_parents = 1,
+			.ops = &clk_regmap_cpu_div_ops,
+		},
+	},
+	.freq_tbl = ftbl_apps_ddr_pll,
+};
+
 /* Calculates the rate for PLL divider.
  * If the divider value is not fixed then it gets the actual divider value
  * from divider table. Then, it calculate the clock rate by dividing the
@@ -1485,6 +1594,7 @@ static struct clk_regmap *gcc_ipq4019_clocks[] = {
 	[GCC_FEPLL500_CLK] = &gcc_fepll500_clk.cdiv.clkr,
 	[GCC_FEPLL_WCSS2G_CLK] = &gcc_fepllwcss2g_clk.cdiv.clkr,
 	[GCC_FEPLL_WCSS5G_CLK] = &gcc_fepllwcss5g_clk.cdiv.clkr,
+	[GCC_APPS_CPU_PLLDIV_CLK] = &gcc_apps_cpu_plldiv_clk.cdiv.clkr,
 };
 
 static const struct qcom_reset_map gcc_ipq4019_resets[] = {
diff --git a/include/dt-bindings/clock/qcom,gcc-ipq4019.h b/include/dt-bindings/clock/qcom,gcc-ipq4019.h
index cd0cd23..921565d 100644
--- a/include/dt-bindings/clock/qcom,gcc-ipq4019.h
+++ b/include/dt-bindings/clock/qcom,gcc-ipq4019.h
@@ -90,6 +90,7 @@
 #define GCC_FEPLL500_CLK				71
 #define GCC_FEPLL_WCSS2G_CLK				72
 #define GCC_FEPLL_WCSS5G_CLK				73
+#define GCC_APPS_CPU_PLLDIV_CLK				74
 
 #define WIFI0_CPU_INIT_RESET				0
 #define WIFI0_RADIO_SRIF_RESET				1
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux