On 30/10/2024 19:58, Jishnu Prakash wrote:
> Add support for ADC_TM part of PMIC5 Gen3.
>
> This is an auxiliary driver under the Gen3 ADC driver, which
> implements the threshold setting and interrupt generating
> functionalities of QCOM ADC_TM drivers, used to support thermal
> trip points.
>
> Signed-off-by: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
> ---
> drivers/thermal/qcom/Kconfig | 11 +
> drivers/thermal/qcom/Makefile | 1 +
> drivers/thermal/qcom/qcom-spmi-adc-tm5-gen3.c | 489 ++++++++++++++++++
> 3 files changed, 501 insertions(+)
> create mode 100644 drivers/thermal/qcom/qcom-spmi-adc-tm5-gen3.c
>
> diff --git a/drivers/thermal/qcom/Kconfig b/drivers/thermal/qcom/Kconfig
> index 2c7f3f9a26eb..f9876fb8606d 100644
> --- a/drivers/thermal/qcom/Kconfig
> +++ b/drivers/thermal/qcom/Kconfig
> @@ -21,6 +21,17 @@ config QCOM_SPMI_ADC_TM5
> Thermal client sets threshold temperature for both warm and cool and
> gets updated when a threshold is reached.
>
> +config QCOM_SPMI_ADC_TM5_GEN3
> + tristate "Qualcomm SPMI PMIC Thermal Monitor ADC5 Gen3"
> + depends on OF && SPMI && IIO && QCOM_SPMI_ADC5_GEN3
|| COMPILE_TEST won't work?
> + select REGMAP_SPMI
> + select QCOM_VADC_COMMON
> + help
> + This enables the auxiliary thermal driver for the ADC5 Gen3 thermal
> + monitoring device. It shows up as a thermal zone with multiple trip points.
> + Thermal client sets threshold temperature for both warm and cool and
> + gets updated when a threshold is reached.
> +
...
> +
> +static const struct auxiliary_device_id adctm5_auxiliary_id_table[] = {
> + { .name = "qcom_spmi_adc5_gen3.adc5_tm_gen3", },
> + {},
> +};
> +
> +MODULE_DEVICE_TABLE(auxiliary, adctm5_auxiliary_id_table);
> +
> +static struct adc_tm5_auxiliary_drv adctm5gen3_auxiliary_drv = {
> + .adrv = {
> + .id_table = adctm5_auxiliary_id_table,
> + .probe = adc_tm5_probe,
> + },
> + .tm_event_notify = adctm_event_handler,
> +};
> +
> +static int __init adctm5_init_module(void)
> +{
> + return auxiliary_driver_register(&adctm5gen3_auxiliary_drv.adrv);
> +}
> +
> +static void __exit adctm5_exit_module(void)
> +{
> + auxiliary_driver_unregister(&adctm5gen3_auxiliary_drv.adrv);
> +}
> +
> +module_init(adctm5_init_module);
> +module_exit(adctm5_exit_module);
Why not module_auxiliary_driver?
Best regards,
Krzysztof
