On 21/06/16 00:23, Stephen Boyd wrote:
On 06/20/2016 01:01 PM, Srinivas Kandagatla wrote:
This patch adds apq8096 db820c basic support with serial port.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/Makefile | 2 +-
arch/arm64/boot/dts/qcom/apq8096-db820c.dts | 21 +++++++++++++++++
arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 34 ++++++++++++++++++++++++++++
3 files changed, 56 insertions(+), 1 deletion(-)
create mode 100644 arch/arm64/boot/dts/qcom/apq8096-db820c.dts
create mode 100644 arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index fa1f661..80ecdfe 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -1,5 +1,5 @@
dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb msm8916-mtp.dtb
-dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb apq8096-db820c.dtb
We should do a new line for each board as other arm64 vendors have done?
I agree, Will fix this in next version.
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
new file mode 100644 >> +/dts-v1/;
+
+#include "apq8096-db820c.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. DB820c";
+ compatible = "qcom,apq8096-db820c";
Should be qcom,apq8096-sbc? At least I have to use that on my board to
match the board ids.
I agree, this should match up with the dtbTool. I have been manually
patching up dtb to include the board-id, pmic id stuff.
I will fix it in next version,
Did not look at full details but, For some reason dtbTool does not
support multiple compatible strings, do you think it makes sense to add
this support in dtb tool to cope up with compatible strings like:
compatible = "qcom,apq8096-db820c", "qcom,apq8096-sbc";
Thanks,
srini
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html