In our hardware design, by combining a funnel and a replicator, it
implement a hardware device with one-to-one correspondence between
output ports and input ports. The programming usage on this device
is the same as funnel. The software uses a funnel and a static
replicator to implement the driver of this device. Since original
funnels only support a single output connection and original
replicator only support a single input connection, the code needs
to be modified to support this new feature. The following is a
typical topology diagram of multi-port output mechanism.
|----------| |---------| |----------| |---------|
| TPDM 0 | | Source0 | | Source 1 | | TPDM 1 |
|----------| |---------| |----------| |---------|
| | | |
| | | |
| --------- | | |
| | | |
| | | |
| | | |
\-------------/ ---------------------- |
\ Funnel 0 / | |
----------- | ------------------------------
| | |
| | |
\------------------/
\ Funnel 1 / ----|
\--------------/ |
| |----> Combine a funnel and a
| | static replicator
/-----------------\ |
/ replicator 0 \ ----|
/---------------------\
| | |
| | |-----------|
| |---------| |
| |TPDM0 |TPDM1
| \-----------------/
| \ TPDA 0 /
| \-------------/
| |
| |
|Source0/1 |
\-------------------------------/
\ Funnel 2 /
\---------------------------/
Changes in V5:
1. Replace "filter-src" with "filter-source" in the
dt-binding document.
-- Suzuki K Poulose
2. Optimize the comments of the patch "coresight:
Add support for trace filtering by source" due to bad
example.
-- Suzuki K Poulose
3. Correct spelling errors in the patch "coresight:
Add support for trace filtering by source".
-- Suzuki K Poulose
4. Optimize the function "coresight_blocks_source".
-- Suzuki K Poulose
5. Add { } in the function "of_coresight_parse_endpoint".
-- Suzuki K Poulose
6. Adjust the order of the patches.
-- Suzuki K Poulose
7. Adjust the alignment in "coresight-platform.c".
-- Suzuki K Poulose
Changes in V4:
1. Use "coresight_get_source(path)" in the function
"coresight_disable_path_from" instead of explicitly
passing the source.
-- Suzuki K Poulose
2. Optimize the order of the input parameters for
"_coresight_build_path".
-- Suzuki K Poulose
3. Reuse the method "coresight_block_source" in
"_coresight_build_path".
-- Suzuki K Poulose
4. Remove the unnecessary () in "coresight_build_path".
-- Suzuki K Poulose
5. Add a helper to check if a device is SOURCE.
-- Suzuki K Poulose
6. Adjust the posistion of setting "still_orphan" in
"coresight_build_path".
-- Suzuki K Poulose
Changes in V3:
1. Rename the function "coresight_source_filter" to
"coresight_block_source". And refine this function.
-- Suzuki K Poulose
2. Rename the parameters of the function
"coresight_find_out_connection" to avoid confusion.
-- Suzuki K Poulose
3. Get the source of path in "coresight_enable_path" and
"coresight_disable_path".
-- Suzuki K Poulose
4. Fix filter source device before skip the port in
"coresight_orphan_match".
-- Suzuki K Poulose
5. Make sure the device still orphan if whter is a filter
source firmware node but the filter source device is null.
-- Suzuki K Poulose
6. Walk through the entire coresight bus and fixup the
"filter_src_dev" if the source is being removed.
-- Suzuki K Poulose
7. Refine the commit description of patch#2.
-- Suzuki K Poulose
8. Fix the warning reported by kernel test robot.
-- kernel test robot.
9. Use the source device directly if the port has a
hardcoded filter in "tpda_get_element_size".
-- Suzuki K Poulose
Changes in V2:
1. Change the reference for endpoint property in dt-binding.
-- Krzysztof Kozlowski
2. Change the property name "filter_src" to "filter-src".
-- Krzysztof Kozlowski
3. Fix the errors in running 'make dt_binding_check'.
-- Rob Herring
4. Pass in the source parameter instead of path.
-- Suzuki K Poulose
5. Reset the "filter_src_dev" if the "src" csdev is being removed.
-- Suzuki K Poulose
6. Add a warning if the "filter_src_dev" is of not the
type DEV_TYPE_SOURCE.
-- Suzuki K Poulose
7. Optimize the procedure for handling all possible cases.
-- Suzuki K Poulose
Changes in V1:
1. Add a static replicator connect to a funnel to implement the
correspondence between the output ports and the input ports on
funnels.
-- Suzuki K Poulose
2. Add filter_src_dev and filter_src_dev phandle to
"coresight_connection" struct, and populate them if there is one.
-- Suzuki K Poulose
3. To look at the phandle and then fixup/remove the filter_src
device in fixup/remove connections.
-- Suzuki K Poulose
4. When TPDA reads DSB/CMB element size, it is implemented by
looking up filter src device in the connections.
-- Suzuki K Poulose
Tao Zhang (4):
dt-bindings: arm: qcom,coresight-static-replicator: Add property for
source filtering
coresight: Add a helper to check if a device is source
coresight: Add support for trace filtering by source
coresight-tpda: Optimize the function of reading element size
.../arm/arm,coresight-static-replicator.yaml | 19 ++-
drivers/hwtracing/coresight/coresight-core.c | 113 +++++++++++++++---
.../hwtracing/coresight/coresight-platform.c | 18 +++
drivers/hwtracing/coresight/coresight-tpda.c | 13 +-
include/linux/coresight.h | 12 +-
5 files changed, 152 insertions(+), 23 deletions(-)
--
2.17.1
