Add support for video, camera, display0 and display1 clock controllers
on SA8775P. The dispcc1 will be enabled based on board requirements.
Reviewed-by: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
Signed-off-by: Taniya Das <quic_tdas@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sa8775p.dtsi | 57 +++++++++++++++++++++++++++++++++++
1 file changed, 57 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
index e8dbc8d820a64f45c62edebca7ce4583a5c716e0..e56a725128e5ec228133a1b008ac2114a4682bef 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -3254,6 +3254,47 @@ llcc: system-cache-controller@9200000 {
interrupts = <GIC_SPI 580 IRQ_TYPE_LEVEL_HIGH>;
};
+ videocc: clock-controller@abf0000 {
+ compatible = "qcom,sa8775p-videocc";
+ reg = <0x0 0x0abf0000 0x0 0x10000>;
+ clocks = <&gcc GCC_VIDEO_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&rpmhcc RPMH_CXO_CLK_A>,
+ <&sleep_clk>;
+ power-domains = <&rpmhpd SA8775P_MMCX>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+ camcc: clock-controller@ade0000 {
+ compatible = "qcom,sa8775p-camcc";
+ reg = <0x0 0x0ade0000 0x0 0x20000>;
+ clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&rpmhcc RPMH_CXO_CLK_A>,
+ <&sleep_clk>;
+ power-domains = <&rpmhpd SA8775P_MMCX>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+ dispcc0: clock-controller@af00000 {
+ compatible = "qcom,sa8775p-dispcc0";
+ reg = <0x0 0x0af00000 0x0 0x20000>;
+ clocks = <&gcc GCC_DISP_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&rpmhcc RPMH_CXO_CLK_A>,
+ <&sleep_clk>,
+ <0>, <0>, <0>, <0>,
+ <0>, <0>, <0>, <0>;
+ power-domains = <&rpmhpd SA8775P_MMCX>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
pdc: interrupt-controller@b220000 {
compatible = "qcom,sa8775p-pdc", "qcom,pdc";
reg = <0x0 0x0b220000 0x0 0x30000>,
@@ -3876,6 +3917,22 @@ IPCC_MPROC_SIGNAL_GLINK_QMP
};
};
+ dispcc1: clock-controller@22100000 {
+ compatible = "qcom,sa8775p-dispcc1";
+ reg = <0x0 0x22100000 0x0 0x20000>;
+ clocks = <&gcc GCC_DISP_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&rpmhcc RPMH_CXO_CLK_A>,
+ <&sleep_clk>,
+ <0>, <0>, <0>, <0>,
+ <0>, <0>, <0>, <0>;
+ power-domains = <&rpmhpd SA8775P_MMCX>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ status = "disabled";
+ };
+
ethernet1: ethernet@23000000 {
compatible = "qcom,sa8775p-ethqos";
reg = <0x0 0x23000000 0x0 0x10000>,
--
2.45.2
