Re: [PATCH v4 1/2] i2c: qup: add ACPI support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jun 08, 2016 at 12:19:44PM -0600, Austin Christ wrote:
> From: Naveen Kaje <nkaje@xxxxxxxxxxxxxx>
> 
> Add support to get the device parameters from ACPI. Assume
> that the clocks are managed by firmware.

Adding Mika to CC: Can you have a look at the ACPI binding? Looks ok to
me...

> 
> Signed-off-by: Naveen Kaje <nkaje@xxxxxxxxxxxxxx>
> Signed-off-by: Austin Christ <austinwc@xxxxxxxxxxxxxx>
> Reviewed-by: sricharan@xxxxxxxxxxxxxx

Please add a name before the email address

> ---
>  drivers/i2c/busses/i2c-qup.c | 59 ++++++++++++++++++++++++++++++++------------
>  1 file changed, 43 insertions(+), 16 deletions(-)
> 
> Changes:
> - v4:
>  - remove warning for fall back to default clock frequency
> - v3:
>  - clean up unused variable
> - v2:
>  - clean up redundant checks and variables
> 
> diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c
> index dddd4da..0f23d58 100644
> --- a/drivers/i2c/busses/i2c-qup.c
> +++ b/drivers/i2c/busses/i2c-qup.c
> @@ -29,6 +29,7 @@
>  #include <linux/platform_device.h>
>  #include <linux/pm_runtime.h>
>  #include <linux/scatterlist.h>
> +#include <linux/acpi.h>

Keep includes sorted.

>  
>  /* QUP Registers */
>  #define QUP_CONFIG		0x000
> @@ -132,6 +133,10 @@
>  /* Max timeout in ms for 32k bytes */
>  #define TOUT_MAX			300
>  
> +/* Default values. Use these if FW query fails */
> +#define DEFAULT_CLK_FREQ 100000
> +#define DEFAULT_SRC_CLK 20000000
> +
>  struct qup_i2c_block {
>  	int	count;
>  	int	pos;
> @@ -1354,14 +1359,13 @@ static void qup_i2c_disable_clocks(struct qup_i2c_dev *qup)
>  static int qup_i2c_probe(struct platform_device *pdev)
>  {
>  	static const int blk_sizes[] = {4, 16, 32};
> -	struct device_node *node = pdev->dev.of_node;
>  	struct qup_i2c_dev *qup;
>  	unsigned long one_bit_t;
>  	struct resource *res;
>  	u32 io_mode, hw_ver, size;
>  	int ret, fs_div, hs_div;
> -	int src_clk_freq;
> -	u32 clk_freq = 100000;
> +	u32 src_clk_freq = 0;
> +	u32 clk_freq = DEFAULT_CLK_FREQ;
>  	int blocks;
>  
>  	qup = devm_kzalloc(&pdev->dev, sizeof(*qup), GFP_KERNEL);
> @@ -1372,7 +1376,11 @@ static int qup_i2c_probe(struct platform_device *pdev)
>  	init_completion(&qup->xfer);
>  	platform_set_drvdata(pdev, qup);
>  
> -	of_property_read_u32(node, "clock-frequency", &clk_freq);
> +	ret = device_property_read_u32(qup->dev, "clock-frequency", &clk_freq);
> +	if (ret) {
> +		dev_notice(qup->dev, "using default clock-frequency %d",
> +			DEFAULT_CLK_FREQ);
> +	}
>  
>  	if (of_device_is_compatible(pdev->dev.of_node, "qcom,i2c-qup-v1.1.1")) {
>  		qup->adap.algo = &qup_i2c_algo;
> @@ -1454,20 +1462,31 @@ nodma:
>  		return qup->irq;
>  	}
>  
> -	qup->clk = devm_clk_get(qup->dev, "core");
> -	if (IS_ERR(qup->clk)) {
> -		dev_err(qup->dev, "Could not get core clock\n");
> -		return PTR_ERR(qup->clk);
> -	}
> +	if (ACPI_HANDLE(qup->dev)) {
> +		ret = device_property_read_u32(qup->dev,
> +				"src-clock-hz", &src_clk_freq);
> +		if (ret) {
> +			dev_warn(qup->dev, "using default src-clock-hz %d",
> +				DEFAULT_SRC_CLK);
> +			src_clk_freq = DEFAULT_SRC_CLK;
> +		}
> +		ACPI_COMPANION_SET(&qup->adap.dev, ACPI_COMPANION(qup->dev));
> +	} else {
> +		qup->clk = devm_clk_get(qup->dev, "core");
> +		if (IS_ERR(qup->clk)) {
> +			dev_err(qup->dev, "Could not get core clock\n");
> +			return PTR_ERR(qup->clk);
> +		}
>  
> -	qup->pclk = devm_clk_get(qup->dev, "iface");
> -	if (IS_ERR(qup->pclk)) {
> -		dev_err(qup->dev, "Could not get iface clock\n");
> -		return PTR_ERR(qup->pclk);
> +		qup->pclk = devm_clk_get(qup->dev, "iface");
> +		if (IS_ERR(qup->pclk)) {
> +			dev_err(qup->dev, "Could not get iface clock\n");
> +			return PTR_ERR(qup->pclk);
> +		}
> +		qup_i2c_enable_clocks(qup);
> +		src_clk_freq = clk_get_rate(qup->clk);
>  	}
>  
> -	qup_i2c_enable_clocks(qup);
> -
>  	/*
>  	 * Bootloaders might leave a pending interrupt on certain QUP's,
>  	 * so we reset the core before registering for interrupts.
> @@ -1514,7 +1533,6 @@ nodma:
>  	size = QUP_INPUT_FIFO_SIZE(io_mode);
>  	qup->in_fifo_sz = qup->in_blk_sz * (2 << size);
>  
> -	src_clk_freq = clk_get_rate(qup->clk);
>  	fs_div = ((src_clk_freq / clk_freq) / 2) - 3;
>  	hs_div = 3;
>  	qup->clk_ctl = (hs_div << 8) | (fs_div & 0xff);
> @@ -1639,6 +1657,14 @@ static const struct of_device_id qup_i2c_dt_match[] = {
>  };
>  MODULE_DEVICE_TABLE(of, qup_i2c_dt_match);
>  
> +#if IS_ENABLED(CONFIG_ACPI)
> +static const struct acpi_device_id qup_i2c_acpi_match[] = {
> +	{ "QCOM8010"},
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(acpi, qup_i2c_acpi_ids);
> +#endif
> +
>  static struct platform_driver qup_i2c_driver = {
>  	.probe  = qup_i2c_probe,
>  	.remove = qup_i2c_remove,
> @@ -1646,6 +1672,7 @@ static struct platform_driver qup_i2c_driver = {
>  		.name = "i2c_qup",
>  		.pm = &qup_i2c_qup_pm_ops,
>  		.of_match_table = qup_i2c_dt_match,
> +		.acpi_match_table = ACPI_PTR(qup_i2c_acpi_match),
>  	},
>  };
>  
> -- 
> Qualcomm Innovation Center, Inc.
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project.
> 

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux