On Mon, Oct 21, 2024 at 11:14:55PM +0200, barnabas.czeman@xxxxxxxxxxxxxx wrote:
> On 2024-10-19 15:43, Dmitry Baryshkov wrote:
> > On Sat, Oct 19, 2024 at 01:50:49PM +0200, Barnabás Czémán wrote:
> > > From: Otto Pflüger <otto.pflueger@xxxxxxxxx>
> > >
> > > Add initial support for MSM8917 SoC.
> > >
> > > Signed-off-by: Otto Pflüger <otto.pflueger@xxxxxxxxx>
> > > [reword commit, rebase, fix schema errors]
> > > Signed-off-by: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
> > > ---
> > > arch/arm64/boot/dts/qcom/msm8917-pins.dtsi | 344 ++++++
> > > arch/arm64/boot/dts/qcom/msm8917.dtsi | 1557
> > > ++++++++++++++++++++++++++++
> > > arch/arm64/boot/dts/qcom/pm8916.dtsi | 9 +-
> > > 3 files changed, 1909 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/arch/arm64/boot/dts/qcom/msm8917-pins.dtsi
> > > b/arch/arm64/boot/dts/qcom/msm8917-pins.dtsi
> > > new file mode 100644
> > > index 0000000000000000000000000000000000000000..f283ffd59b8aca8e510ef95d5526af9592a1c036
> > > --- /dev/null
> > > +++ b/arch/arm64/boot/dts/qcom/msm8917-pins.dtsi
> >
> > Please merge into msm8917.dtsi (for generic parts) and
> > msm8917-boatd.dtsi (for board-specific parts).
> >
> > > @@ -0,0 +1,344 @@
> > > +// SPDX-License-Identifier: GPL-2.0
> >
> > If possible, GPL-2.0 OR MIT, or GPL-2.0 OR BSD-2/3-Clause
> Unfortunatelly i cannot change the license i do not own the original code.
Ack
> >
> > > + tsens_caldata: caldata@d0 {
> > > + reg = <0x01d8 0x14>;
> > > + };
> >
> > No, individual bit definitions for each of tsens fuse values.
> >
> > > + };
> > > +
> > > + rpm_msg_ram: sram@60000 {
> > > + compatible = "qcom,rpm-msg-ram";
> > > + reg = <0x00060000 0x8000>;
> > > + };
> > > +
> > > + tsens: thermal-sensor@4a9000 {
> > > + compatible = "qcom,msm8917-tsens", "qcom,tsens-v1";
> > > + reg = <0x004a9000 0x1000>,
> > > + <0x004a8000 0x1000>;
> > > + nvmem-cells = <&tsens_caldata>;
> > > + nvmem-cell-names = "calib";
> >
> > And here too, individual bits instead of a single blob.
> I do not know how to do that i have only find some parts at downstream
> driver to be able to separate
> the cells but i do not have every information for it.
Well, you don't have to describe every information. I'm simply asking
you to replace single tsens_caldata entry with per-sensor and per-point
data, see e.g. msm8976.dtsi and data_8976 / ops_8976.
> >
> > > + #qcom,sensors = <10>;
> > > + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
> > > + interrupt-names = "uplow";
> > > + #thermal-sensor-cells = <1>;
> > > + };
> > > +
> > > +
[...]
> > > + gpu: gpu@1c00000 {
> > > + compatible = "qcom,adreno-306.32", "qcom,adreno";
> >
> > Is it really .32 ?
> Yes it is A306A (Adreno 308)
Ack
--
With best wishes
Dmitry
