Re: [PATCH v7 6/7] PCI: qcom: Disable ASPM L0s and remove BDF2SID mapping config for X1E80100 SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 10/18/2024 10:25 PM, Bjorn Andersson wrote:
On Wed, Oct 16, 2024 at 08:04:11PM -0700, Qiang Yu wrote:
Currently, the cfg_1_9_0 which is being used for X1E80100 has config_sid
callback in its ops and doesn't disable ASPM L0s. However, as same as
SC8280X, PCIe controllers on X1E80100 are connected to SMMUv3, hence don't
Would be nice to document the connection between SMMUv3 and "don't need
config_sid()" is because we don't have support for the SMMUv3.
We don't need config_sid because we have support for SMMUv3 on HW.
SMMUv3 is able to use BDF as SID, so BDF2SID mapping is not required
and removed on HW.

Thanks,
Qiang
need config_sid() callback and hardware team has recommended to disable
L0s as it is broken in the controller. Hence reuse cfg_sc8280xp for
I expect that config_sid() and "disable L0s" are two separate issues.
I'm fine with you solving both in a single commit, but I'd prefer the
two subjects to be covered in at least two separate sentences.

Regards,
Bjorn

X1E80100.

Fixes: 6d0c39324c5f ("PCI: qcom: Add X1E80100 PCIe support")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
  drivers/pci/controller/dwc/pcie-qcom.c | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 468bd4242e61..c533e6024ba2 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -1847,7 +1847,7 @@ static const struct of_device_id qcom_pcie_match[] = {
  	{ .compatible = "qcom,pcie-sm8450-pcie0", .data = &cfg_1_9_0 },
  	{ .compatible = "qcom,pcie-sm8450-pcie1", .data = &cfg_1_9_0 },
  	{ .compatible = "qcom,pcie-sm8550", .data = &cfg_1_9_0 },
-	{ .compatible = "qcom,pcie-x1e80100", .data = &cfg_1_9_0 },
+	{ .compatible = "qcom,pcie-x1e80100", .data = &cfg_sc8280xp },
  	{ }
  };
--
2.34.1


--
linux-phy mailing list
linux-phy@xxxxxxxxxxxxxxxxxxx
https://lists.infradead.org/mailman/listinfo/linux-phy




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux