Re: [PATCH v7 5/7] PCI: qcom: Remove BDF2SID mapping config for SC8280X family SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 10/18/2024 9:51 PM, Johan Hovold wrote:
On Wed, Oct 16, 2024 at 08:04:10PM -0700, Qiang Yu wrote:
On SC8280X family SoC, PCIe controllers are connected to SMMUv3, hence
they don't need the config_sid() callback in ops_1_9_0 struct. Fix it by
introducing a new ops struct, namely ops_1_21_0 which is same as ops_1_9_0
without config_sid() callback so that BDF2SID mapping won't be configured
during init.
The sc8280xp PCIe devicetree nodes do not specify an 'iommu-map' so the
config_sid() callback is effectively a no-op. Please rephrase this so
that it becomes obvious that this is a clean up rather than fix.

Fixes: 70574511f3fc ("PCI: qcom: Add support for SC8280XP")
And drop the Fixes tag.

Signed-off-by: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
  drivers/pci/controller/dwc/pcie-qcom.c | 12 +++++++++++-
  1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 88a98be930e3..468bd4242e61 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -1367,6 +1367,16 @@ static const struct qcom_pcie_ops ops_2_9_0 = {
  	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
  };
+/* Qcom IP rev.: 1.21.0 */
Is this the actual IP revision on sc8280xp (and not just the revision
used on x1e80100)?
Get confirmation from HW team. 1.21.0 is Qcom IP rev of sc8280xp,
Synopsis IP rev is 5.60a.

Thanks,
Qiang
Please also provide the Synopsis IP rev like the other configs do.

+static const struct qcom_pcie_ops ops_1_21_0 = {
+	.get_resources = qcom_pcie_get_resources_2_7_0,
+	.init = qcom_pcie_init_2_7_0,
+	.post_init = qcom_pcie_post_init_2_7_0,
+	.host_post_init = qcom_pcie_host_post_init_2_7_0,
+	.deinit = qcom_pcie_deinit_2_7_0,
+	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
+};
+
  static const struct qcom_pcie_cfg cfg_1_0_0 = {
  	.ops = &ops_1_0_0,
  };
And try to keep these structs sorted by revision. At least put this one
after ops_1_9_0.

Johan




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux