Hey Eduardo,
On 6/10/2016 11:32 AM, Rajendra Nayak wrote:
Eduardo,
On 05/05/2016 02:21 PM, Rajendra Nayak wrote:
Current set of patches apply on 4.6-rc6. Fixes for the nvmem apis
are now posted [1] and queued in -next [2]
Patches [1-6] will need to be merged via thermal tree/Eduardo.
Any plans to pull these in for 4.8?
These patches have been on the list for quite a while, and they
do not have any outstanding dependencies or comments to be
addressed. I would really hope to see these in for 4.8.
Let me know if there is something you want me to address before
you pull them in.
regards,
Rajendra
regards,
Rajendra
Patches [7-11] will need to go via qcom-msm tree/Andy.
Changes since v5:
* Minor review fixes from Eduardo
Changes since v4:
* dropped qcom,tsens-slopes binding, used coefficients instead
* dropped qcom,sensor-id binding
* Added support for msm8996 family
* Other minor review fixes from v4
Changes since v3:
* Dropped 'clk: qcom: create virtual child device for TSENS' which
is picked up by Stephen
* Updated GCC bindings with optional TSENS properties
Changes since v2:
* Minor review fixes from Stephen/Punit and rebase on 4.3-rc4
Changes since v1:
* Created virtual tsens device from gcc driver for 8960,
with DT having a single node for gcc and tsens
* Minor fixes with rebasing on 4.3-rc1
Changes since RFC:
* Added support for 8916 and 8084
* Based off the latest nvmem framework patches [1]
* Minor review fixes for comments mostly from Lina
This is an attempt to have a single TSENS driver for
the different versions of the TSENS IP that exist, on
different qcom msm/apq SoCs'
Support is added for msm8916, msm8960, msm8974 and msm8996 families.
A lot of the work is based of original code from Stephen Boyd
and Siddartha Mohanadoss. I have also picked some of what
Narendran Rajan did in his attempt to upstream the support
for 8960 family. I could not keep the original authorship on
any of the patches because I ended up moving the code around
quite a bit in an effort to have a single driver for the
various devices. I would be glad to change the authorship
for any of the patches if needed.
[1] https://lkml.org/lkml/2016/4/24/103
[2] git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git char-misc-next
Rajendra Nayak (11):
thermal: qcom: tsens: Add a skeletal TSENS drivers
thermal: qcom: tsens-8916: Add support for 8916 family of SoCs
thermal: qcom: tsens-8974: Add support for 8974 family of SoCs
thermal: core: export apis to get slope and offset
thermal: qcom: tsens-8960: Add support for 8960 family of SoCs
thermal: qcom: tsens-8996: Add support for 8996 family of SoCs
arm: dts: msm8974: Add thermal zones, tsens and qfprom nodes
arm: dts: apq8064: Add thermal zones, tsens and qfprom nodes
arm: dts: apq8084: Add thermal zones, tsens and qfprom nodes
arm64: dts: msm8916: Add thermal zones, tsens and qfprom nodes
arm64: dts: msm8996: Add thermal zones, tsens and qfprom nodes
.../devicetree/bindings/clock/qcom,gcc.txt | 18 ++
.../devicetree/bindings/thermal/qcom-tsens.txt | 21 ++
Documentation/thermal/sysfs-api.txt | 12 +
arch/arm/boot/dts/qcom-apq8064.dtsi | 103 ++++++++
arch/arm/boot/dts/qcom-apq8084.dtsi | 103 ++++++++
arch/arm/boot/dts/qcom-msm8974.dtsi | 103 ++++++++
arch/arm64/boot/dts/qcom/msm8916.dtsi | 64 +++++
arch/arm64/boot/dts/qcom/msm8996.dtsi | 92 +++++++
drivers/thermal/Kconfig | 5 +
drivers/thermal/Makefile | 1 +
drivers/thermal/qcom/Kconfig | 11 +
drivers/thermal/qcom/Makefile | 2 +
drivers/thermal/qcom/tsens-8916.c | 113 ++++++++
drivers/thermal/qcom/tsens-8960.c | 292 +++++++++++++++++++++
drivers/thermal/qcom/tsens-8974.c | 244 +++++++++++++++++
drivers/thermal/qcom/tsens-8996.c | 84 ++++++
drivers/thermal/qcom/tsens-common.c | 141 ++++++++++
drivers/thermal/qcom/tsens.c | 200 ++++++++++++++
drivers/thermal/qcom/tsens.h | 92 +++++++
drivers/thermal/thermal_core.c | 30 +++
include/linux/thermal.h | 8 +
21 files changed, 1739 insertions(+)
create mode 100644 Documentation/devicetree/bindings/thermal/qcom-tsens.txt
create mode 100644 drivers/thermal/qcom/Kconfig
create mode 100644 drivers/thermal/qcom/Makefile
create mode 100644 drivers/thermal/qcom/tsens-8916.c
create mode 100644 drivers/thermal/qcom/tsens-8960.c
create mode 100644 drivers/thermal/qcom/tsens-8974.c
create mode 100644 drivers/thermal/qcom/tsens-8996.c
create mode 100644 drivers/thermal/qcom/tsens-common.c
create mode 100644 drivers/thermal/qcom/tsens.c
create mode 100644 drivers/thermal/qcom/tsens.h
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html