Add bindings for the pin controller (TLMM) present on the Qualcomm SAR2130P platform. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> --- .../bindings/pinctrl/qcom,sar2130p-tlmm.yaml | 138 +++++++++++++++++++++ 1 file changed, 138 insertions(+) diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sar2130p-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sar2130p-tlmm.yaml new file mode 100644 index 0000000000000000000000000000000000000000..b388380b1ce02e21283e2200bce241bba6100024 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sar2130p-tlmm.yaml @@ -0,0 +1,138 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sar2130p-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. SAR2130P TLMM block + +maintainers: + - Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm SAR2130P SoC. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,sar2130p-tlmm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-reserved-ranges: + minItems: 1 + maxItems: 78 + + gpio-line-names: + maxItems: 156 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sar2130p-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sar2130p-tlmm-state" + additionalProperties: false + +$defs: + qcom-sar2130p-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|15[0-5])$" + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + enum: [ aoss_cti, atest_char, atest_char0, atest_char1, atest_char2, + atest_char3, atest_usb0, atest_usb00, atest_usb01, atest_usb02, + atest_usb03, audio_ref, cam_mclk, cci_async, cci_i2c, + cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, + cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, + ddr_pxi1, ddr_pxi2, ddr_pxi3, dp0_hot, ext_mclk0, ext_mclk1, + gcc_gp1, gcc_gp2, gcc_gp3, gpio, host2wlan_sol, i2s0_data0, + i2s0_data1, i2s0_sck, i2s0_ws, ibi_i3c, jitter_bist, mdp_vsync, + mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3, pcie0_clkreqn, + pcie1_clkreqn, phase_flag0, phase_flag1, phase_flag10, + phase_flag11, phase_flag12, phase_flag13, phase_flag14, + phase_flag15, phase_flag16, phase_flag17, phase_flag18, + phase_flag19, phase_flag2, phase_flag20, phase_flag21, + phase_flag22, phase_flag23, phase_flag24, phase_flag25, + phase_flag26, phase_flag27, phase_flag28, phase_flag29, + phase_flag3, phase_flag30, phase_flag31, phase_flag4, + phase_flag5, phase_flag6, phase_flag7, phase_flag8, + phase_flag9, pll_bist, pll_clk, prng_rosc0, prng_rosc1, + prng_rosc2, prng_rosc3, qdss_cti, qdss_gpio, qdss_gpio0, + qdss_gpio1, qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13, + qdss_gpio14, qdss_gpio15, qdss_gpio2, qdss_gpio3, qdss_gpio4, + qdss_gpio5, qdss_gpio6, qdss_gpio7, qdss_gpio8, qdss_gpio9, + qspi0, qspi1, qspi2, qspi3, qspi_clk, qspi_cs0, qspi_cs1, qup0, + qup1, qup2, qup3, qup4, qup5, qup6, qup7, qup8, qup9, qup10, + qup11, tb_trig, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, + tmess_prng0, tmess_prng1, tmess_prng2, tmess_prng3, + tsense_pwm1, tsense_pwm2, usb0_phy, vsense_trigger ] + + required: + - pins + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + pinctrl@f100000 { + compatible = "qcom,sar2130p-tlmm"; + reg = <0x0f100000 0x300000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 156>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + + gpio-wo-state { + pins = "gpio1"; + function = "gpio"; + }; + + uart-w-state { + rx-pins { + pins = "gpio26"; + function = "qup7"; + bias-pull-up; + }; + + tx-pins { + pins = "gpio27"; + function = "qup7"; + bias-disable; + }; + }; + }; +... -- 2.39.5
