The PCIe PHYs on x1e80100 do not a have a qref supply so stop requesting
one. This also avoids the follow warning at boot:
qcom-qmp-pcie-phy 1bfc000.phy: supply vdda-qref not found, using dummy regulator
Fixes: 9dab00ee9544 ("phy: qcom: qmp-pcie: Add Gen4 4-lanes mode for X1E80100")
Fixes: 606060ce8fd0 ("phy: qcom-qmp-pcie: Add support for X1E80100 g3x2 and g4x2 PCIE")
Cc: Abel Vesa <abel.vesa@xxxxxxxxxx>
Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
---
drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
index f71787fb4d7e..36aaac34e6c6 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -3661,8 +3661,8 @@ static const struct qmp_phy_cfg x1e80100_qmp_gen4x2_pciephy_cfg = {
.reset_list = sdm845_pciephy_reset_l,
.num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
- .vreg_list = sm8550_qmp_phy_vreg_l,
- .num_vregs = ARRAY_SIZE(sm8550_qmp_phy_vreg_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
.regs = pciephy_v6_regs_layout,
.pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
@@ -3695,8 +3695,8 @@ static const struct qmp_phy_cfg x1e80100_qmp_gen4x4_pciephy_cfg = {
.reset_list = sdm845_pciephy_reset_l,
.num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
- .vreg_list = sm8550_qmp_phy_vreg_l,
- .num_vregs = ARRAY_SIZE(sm8550_qmp_phy_vreg_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
.regs = pciephy_v6_regs_layout,
.pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
--
2.45.2
