Re: [PATCH v3 1/2] ASoC: msm8916: Add codec Device Tree bindings.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jun 10, 2016 at 11:18:44AM -0700, Srinivas Kandagatla wrote:
> diff --git a/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd.txt
> b/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd.txt
> new file mode 100644
> index 0000000..0559c1f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd.txt
> @@ -0,0 +1,103 @@
> +msm8916 audio CODEC audio CODEC
> +
> +Codec IP is divided into two parts, first analog which is integrated in
> pmic pm8916
> +and secondly digital part which is integrated into application processor.
> Codec register
> +controls are also split across pmic an lpass. Analog part is controlled
> via spmi bus to pmic.

Cleaning up the description:

msm8916 audio CODEC

Codec IP is divided into two parts:
  * analog, which is integrated into pmic pm8916
  * digital, which is integrated into LPASS on the SOC
Codec registers are also split across pmic and LPASS.
Analog codec is controlled via spmi bus to pmic.

> +## Bindings for codec core on pmic:
> +
> +Required properties
> + - compatible = "qcom,msm8916-pmic-wcd-codec";

OK.  Looking at this again, I think its better just to drop the pmic.

> +  "spk_cnp_int" - Speaker click and pop interrupt
> +  "spk_clip_int" - Speaker clip interrupt
> +  "spk_ocp_int" - Speaker over current protect interrupt.
> +  "ins_rem_det1" - jack insert removal detect interrupt 1.
> +  "but_rel_det" - button release interrupt
> +  "but_press_det" - button press event
> +  "ins_rem_det" - jack insert removal detect interrup
> +  "mbhc_int"	- multi button headset interrupt.
> +  "ear_ocp_int" - Earphone over current protect interrupt.
> +  "hphr_ocp_int" - Headphone R over current protect interrupt.
> +  "hphl_ocp_det" - Headphone L over current protect interrupt
> +  "ear_cnp_int" - earphone cnp interrupt.
> +  "hphr_cnp_int" - hphr click and pop interrupt.
> +  "hphl_cnp_int" - hphl click and pop interrupt

Please use labels that more closely match the HW spec:
  "cdc_spk_cnp_int"
  "cdc_spk_clip_int"
  "cdc_spk_ocp_int"
  "mbhc_ins_rem_det1"
  "mbhc_but_rel_det"
  "mbhc_but_press_det"
  "mbhc_ins_rem_det"
  "mbhc_switch_int"
  "cdc_ear_ocp_int"
  "cdc_hphr_ocp_int"
  "cdc_hphl_ocp_int"
  "cdc_ear_cnp_int"
  "cdc_hphr_cnp_int"
  "cdc_hphl_cnp_int"

-- 
Kenneth Westfield
Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, 
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux