The X1E80100 has two SDHC controllers (called SDC2 and SDC4). Describe both of them and enable the SDC2 on QCP. This brings SD card support for the microSD port on QCP. The SDC4 is described but there is no device outthere yet that makes use of it, AFAIK. Didn't include the SDC4 pins yet because there are some bindings errors that need to be addressed, and since there is no HW that actually uses it, we can describe them at a later stage. Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx> --- Changes in v2: - rebased on next-20241011 - dropped the bindings schema update patch - dropped the sdhci-caps-mask properties from both controllers as SDR104/SDR50 are actually supported - Link to v1: https://lore.kernel.org/r/20241008-x1e80100-qcp-sdhc-v1-0-dfef4c92ae31@xxxxxxxxxx --- Abel Vesa (3): arm64: dts: qcom: x1e80100: Describe the SDHC controllers arm64: dts: qcom: x1e80100: Describe TLMM pins for SDC2 arm64: dts: qcom: x1e80100-qcp: Enable SD card support arch/arm64/boot/dts/qcom/x1e80100-qcp.dts | 20 +++++ arch/arm64/boot/dts/qcom/x1e80100.dtsi | 142 ++++++++++++++++++++++++++++++ 2 files changed, 162 insertions(+) --- base-commit: d61a00525464bfc5fe92c6ad713350988e492b88 change-id: 20241007-x1e80100-qcp-sdhc-15c716dad946 Best regards, -- Abel Vesa <abel.vesa@xxxxxxxxxx>
