Re: [PATCH 1/2] arm64: dts: qcom: Add support for usb nodes on QCS8300

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Oct 10, 2024 at 01:26:35AM GMT, Krishna Kurapati wrote:
> Add support for USB controllers on QCS8300. The second
> controller is only High Speed capable.
> 
> Signed-off-by: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/qcs8300.dtsi | 165 ++++++++++++++++++++++++++
>  1 file changed, 165 insertions(+)

[...]

> +
> +		usb_2: usb@a4f8800 {
> +			compatible = "qcom,qcs8300-dwc3", "qcom,dwc3";
> +			reg = <0x0 0x0a4f8800 0x0 0x400>;
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			ranges;
> +
> +			clocks = <&gcc GCC_CFG_NOC_USB2_PRIM_AXI_CLK>,
> +				 <&gcc GCC_USB20_MASTER_CLK>,
> +				 <&gcc GCC_AGGRE_USB2_PRIM_AXI_CLK>,
> +				 <&gcc GCC_USB20_SLEEP_CLK>,
> +				 <&gcc GCC_USB20_MOCK_UTMI_CLK>;
> +			clock-names = "cfg_noc",
> +				      "core",
> +				      "iface",
> +				      "sleep",
> +				      "mock_utmi";
> +
> +			assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
> +					  <&gcc GCC_USB20_MASTER_CLK>;
> +			assigned-clock-rates = <19200000>, <120000000>;
> +
> +			interrupts-extended = <&intc GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
> +					      <&intc GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>,
> +					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
> +					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
> +			interrupt-names = "pwr_event",
> +					  "hs_phy_irq",
> +					  "dp_hs_phy_irq",
> +					  "dm_hs_phy_irq";
> +
> +			power-domains = <&gcc GCC_USB20_PRIM_GDSC>;
> +			required-opps = <&rpmhpd_opp_nom>;
> +
> +			resets = <&gcc GCC_USB20_PRIM_BCR>;
> +
> +			interconnects = <&aggre1_noc MASTER_USB2 0 &mc_virt SLAVE_EBI1 0>,
> +					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB2 0>;
> +			interconnect-names = "usb-ddr", "apps-usb";

As this is a USB2-only host, shouldn't it also have qcom,select-utmi-as-pipe-clk ?

> +
> +			status = "disabled";
> +
> +			usb_2_dwc3: usb@a400000 {
> +				compatible = "snps,dwc3";
> +				reg = <0x0 0x0a400000 0x0 0xe000>;
> +				interrupts = <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>;
> +				iommus = <&apps_smmu 0x20 0x0>;
> +				phys = <&usb_2_hsphy>;
> +				phy-names = "usb2-phy";
> +				snps,dis_u2_susphy_quirk;
> +				snps,dis_enblslpm_quirk;
> +			};
> +		};
>  	};
>  
>  	arch_timer: timer {
> -- 
> 2.34.1
> 

-- 
With best wishes
Dmitry




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux